Product showcase – the build
The side provides space for radiators up to 360 mm; the top is up to 360 mm (up to 68 mm wide). We installed Endorfy Navis F360 (360 mm LCS) at the top. The inside is very flexible in terms of the installation process. The GPU is installed vertically. The PSU is also secured through the rear; its fan facing the side panel will draw fresh air.
Before installing the motherboard, detach the preinstalled PCIe riser cable from the expansion slot. These days, the ATX boards usually skip the top-most slot; you have to move it down one slot.
Routing the cables at the back of the motherboard tray wasn’t very difficult, as there’s about 90 mm of space for that. You can install the E-ATX motherboard here; it would not block the cable routes (like in the Y60).
