Cougar Blazer review

PC Cases and Modding 229 Page 9 of 12 Published by


Product Showcase - The finished build

Product Showcase - The finished build

On this page, you’ll find a selection of photos of the finished build inside the Cougar BLAZER. The GPU that we used here is an air-cooled RTX 2080 Ti, and the CPU is cooled (for measurements) either with air (Thermalright True Spirit 120 Direct), or with a liquid cooler placed at the front of the case.

The NZXT Kraken X62 was used for the purpose of this photo section (with the radiator placed at the front). The motherboard is an ATX form factor one (and it looks relatively small in this Cougar chassis), based on the Z390 chipset, with an Intel i9 9900K. The GPU comes from Gigabyte, and it’s the Gaming OC version (GeForce RTX 2080 Ti).
The final result looks good. There were no major issues with installing the components inside. The PSU bracket is a bit tight and the drives on the back of the motherboard should be installed before putting it on the tray, but that's all. Overall, fitting all the cables of the test setup in the case wasn’t difficult, and the EPS power cable didn’t need to be pre-routed before we attached the motherboard to the tray.










Share this content
Twitter Facebook Reddit WhatsApp Email Print