NAS Settings

NAS Settings

And here is the final page with the screenshots. You'll find here the settings and the storage manager. As for the first one - after hitting the button you'll find a lot of stuff to adjust. Probably you won't need half of it, but still - it's good to have it all.

One of the tabs that I've found the most interesting was the "Hardware", which enables you to:

• set the behavior of the LEDs

• set the time after which the drives will enter the hibernation mode (and power saving is crucial especially in these dark times ;) )

• set the Wake on LAN/WAN and the EuP mode configuration

• set the fan speed (you can have low/medium/high speed or auto)

Another interesting tab is the "Network", where you can check the addresses, status, DNS server etc.

In the "General" tab, under "Media mode" there's a possibility to enable it (for example for PLEX purposes), which allocates some of the DRAM, to prevent stutters/buffering when transcoding/streaming.

In the ADM Update tab, there's an easy way to upgrade the system. It's done almost automatically.