CPU-Z – DDR4 with a Core i7 processor, with XMP enabled

X to the M to the P

Let’s start with CPU-Z. It’s the basic tool for checking the current configuration of the system. Usually, you enable the XMP profile, and that’s it. Otherwise, at default settings, the memory will be running at 2133 MHz, and that can definitely slow down your rig. Sometimes it can happen that XMP won’t work, so you’ll have to set the timings manually. With the EVGA Z370 FTW, all it took was to change one setting (XMP Profile #1) in the second tab, save the BIOS, and reboot.

One remark, same as for the Patriot  kit, I couldn’t find a QVL list on their website, so it’s not clear exactly which vendors and motherboards are supported.  However, you can make the assumption that Gigabyte and MSI were verified for sure (as their lighting software compatibility is listed). Despite that omission, there was no problem with the Corsair Vengeance Pro RGB memory kit, and the system booted with the memory running at 3200 MHz without any issues.

Aida64 CPUID screenshots, showing similar data.

DDR4 does indicate a double data rate, so you don’t have to worry about the displayed memory clock, as the effective RAM frequency is 3200 MHZ.