Product Showcase

You'll get 8 PCI slots to play around with so in theory you can house up-to three graphics cards in here, four if you are really lucky. You secure the graphics cards or other cards with a thumbscrew. Above it, two round holes with rubber inlays. Those could be used for LCS tubing, but are intended to route the front panel USB 3.0 connector cables towards the rear IO (where USB 3.0 connectors are located).

A good and popular trend these days is to make a big gaping hole in the motherboard tray. This actually is a CPU backplate cutout which allows you to remove and install a new CPU cooler much easier.

Typically you'd need to take out the motherboard to install a new cooler, now you can access it from both sides without that unpleasant experience of removing a motherboard from the chassis. We can also see the gaps in the tray with the rubber inlays here a tad better (grommet holes), here you can route your cabling through, and the rubber inlays keep things clean and tidy looking.

At the top side we can see the 120mm and 200mm fans, these are included and installed for you already. In the upper mesh you'll notice that mounting holes for other fan and radiator solutions have already been prepped.

And fair enough, there a lot of wiring to manage alright, but there's plenty of space to do that in an invisible to the eyes manner. The cables you are looking at are all cables for the front-panel connectors,  yet also fan cables that lead towards the fan controller. There is plenty of space on the backside to route all that cabling through.

There is just tons of space for cables, making cable routing and management a very grand feature of the 600T.