Palit GeForce RTX 3090 Ti GameRock OC review

Graphics cards 1047 Page 1 of 29 Published by

teaser

Introduction

Palit GeForce RTX 3090 Ti GameRock OC24GB review

Palit offers the GeForce RTX 3090 GameRock OC edition graphics card, which we review today. The 'Ti' edition of the GeForce RTX 3090 has been in the works for quite some time. The flagship series has been upgraded even more, with quicker memory, more shaders, and a higher TGP in the 450-500 Watt range. For a product in this enthusiast class, the substantial power distribution is extremely fine-tuned. That, and 24 GB of the fastest GDDR6X RAM money can buy. What benefits will a product with a beefed-up 10752 shader core provide? The GeForce RTX 3090 Ti is the first graphics card to include two gigabytes GDDR6X memory chips rated at an effective 21 Gbps data transmission rate. Additionally, it will have a new 16-pin standardized power connector. Users should ensure that their power supplies are capable of delivering 450W to the GPU alone, so we're slowly getting back to  1000W supplies, particularly when combined with other high-end desktop components. It's a bit of a beast really, and while we're not certain why graphics cards rated 450 Watt in their defaults setup (yes tweaked you could pass 500 Watts) are deemed as an acceptable thing, we certainly cannot deny the sheer rendering power that is thrown at us today. In this years CES presentation, NVIDIA teased the RTX 3090 Ti. The graphics card will make use of all 10752 shader cores on the GA102 GPU. NVIDIA has introduced 24GB of GDDR6X memory with a 21 Gbps Ti clock speed. The maximum potential bandwidth of 1 TB/s is achieved coupled to a 384-bit memory bus, which is over 8% faster than the standard GeForce RTX 3090. The triple-slot arrangement of the Founders Edition RTX 3090 Ti is nearly identical to that of the original model. The founder card will be powered by a single 16-pin power socket with a maximum output power of 450W. The card includes a base clock of 1560 MHz and a boost clock of 1860 MHz, which is quicker than the regular 3090 model.  On the GeForce RTX 3090 Ti, NVIDIA enabled 84 SM units, resulting in a total of 10,752 shader cores (82 SM / 10496 cores on the RTX 3090 Non-Ti). Of course the  GeForce RTX 3090 Ti has RT (Ray-Tracing) cores, Tensor cores as well. The Ampere GA102 GPU based card was supposed to launch earlier this year already but was delayed a good month. It was 2017 when Ampere as a GPU architecture surfaced on the web, and, up to earlier this year, NVIDIA had not listed this name in any of its roadmaps on the consumer side. It was with military-level secrecy that the Ampere consumer part was developed. Ampere, of course, is the base unit of electric current in the international system of units. But the GPU is named after André-Marie Ampère, a French mathematician and physicist, considered the father of electrodynamics. NVIDIA has a track record of naming their GPU architectures after mathematicians and physicists or figures from closely related fields, of naming a few; Pascal, Fermi, Kepler, Maxwell, and, more recently, Turing. While it was no secret that the new GPUs would be based on Ampere, we've seen much discussion about fabrication nodes, architecture, and specifications. Still, everybody seems to have forgotten that Ampere already launched earlier this year for the HPC market. The first product based on Ampere was the NVIDIA Tesla A100, outfitted with a GA100 Ampere GPU based on 7nm fabricated at TSMC; that product holds 54 billion transistors 6912 Shader cores.  On September 1st of the year, 2020, NVIDIA announced three initial Ampere graphics cards in its first launch wave. A week before announcements, specifications of the GeForce RTX 3080 and 3090 took a twist; the shader core count mysteriously doubled up from what everybody expected. The GPUs are fabricated on an 8nm node derived from Samsung. This process is a further development of Samsung's 10nm process; no EUV is applied in production just yet. The first wave of announcements would see the GeForce RTX 3080 and 3090 being released first, and, as a bit of a surprise, the GeForce RTX 3070 would be arriving in roughly the same timeframe as well. The initial launch of Ampere for consumers entails the GeForce RTX 3070 8GB GDDR6, RTX 3080 10GB GDDR6X, then came the 24GB GDDR6X based premium flagship, and today the 3090 Ti. The lineup nearly doubles Raytracing performance with Gen2 ray-tracing cores and 3rd iteration Tensor cores.  The NVIDIA GA102 GPU was used initially for two products, the GeForce RTX 3080 and 3090 graphics cards. And it is one big GPU die and product overall alright; the 3090 Ti's GA102-350-A1 GPU is armed with 10.752 Shader processors and 28 billion transistors. In this review, we'll check out the mother of them all, the GeForce RTX 3090 Ti, paired with 24GB of updated GDDR6X graphics memory, 24 GB, and 10K+ Shader cores.

The new PCI Express 5.0  12(+4)-pin 12VHPWR connector, can offer up to 600 watts. The GeForce RTX 3090 Ti, on the other hand, will always come with an adaptor for three 6+2 pins connectors to that new 12VHPWR connector.


Palit GeForce RTX 3090 GameRock OC 24G

The Palit GeForce RTX 3090 Ti GamingPRO OC 24G is again fitted with that NVIDIA GA102 GPU, this time the revision 350 GPU SKU; it has an almost unimaginable 10.752 Shader cores activated and is paired with a staggering 24GB all-new 21 Gbps GDDR6X graphics memory, values that have been exceptional, until now. Palit applied a semi-passive design with three fans that start to spin and cool once the GPU warms up, and thus remains passive in idle load situations. The card is fitted with the new 16-pin power connector. The card is rated with a 460W power draw from the GPU (TGP). Weighing in at just over 1500g this kid also has been sized quite normally at 294 x 112 x 60 mm. The out-of-the-box boost clock for this product is 1890 MHz. Have a peek, and then let's head onwards into the photoshoot. She's quite pretty looking, especially when RGB light up.


Img_9948

Share this content
Twitter Facebook Reddit WhatsApp Email Print