AMD Phenom II X4 810 and X3 720BE review (AM3) - Perfomance 3DMark Vantage (DirectX 10) CPU | GPU

by Hilbert Hagedoorn on: 02/08/2009 03:00 PM [ ] 0 comment(s)

3DMark Vantage (DirectX 10)

3DMark Vantage focuses on the two areas most critical to gaming performance: the CPU and the GPU. With the emergence of multi-package and multi-core configurations on both the CPU and GPU side, the performance scale of these areas has widened, and the visual and game-play effects made possible by these configurations are accordingly wide-ranging. This makes covering the entire spectrum of 3D gaming a difficult task. 3DMark Vantage solves this problem in three ways:

1. Isolate GPU and CPU performance benchmarking into separate tests,
2. Cover several visual and game-play effects and techniques in four different tests, and
3. Introduce visual quality presets to scale the graphics test load up through the highest-end hardware.

To this end, 3DMark Vantage has two GPU tests, each with a different emphasis on various visual techniques, and two CPU tests, which cover the two most common CPU-side tasks: Physics Simulation and AI. It also has four visual quality presets (Entry, Performance, High, and Extreme) available in the Advanced and Professional versions, which increase the graphics load successively for even more visual quality. Each preset will produce a separate, official 3DMark Score, tagged with the preset in question.

The graphics tests will have four quality presets available: Entry, Performance, High and Extreme. Each preset specifies a certain setting for the rendering options listed in section 5.6. The graphics load increases significantly from the lowest to the highest preset. The Performance preset is targeted for mid-range hardware with 256 MB of graphics memory. The Entry preset is targeted for integrated and low-end hardware with 128 MB of graphics memory. The higher presets require 512MB of graphics memory, and are targeted for high-end and multi-GPU systems.

The 3Dmark Vantage P Score

Some hate it, some love it, here are the 3DMark Vantage score results. We start off with the standard test run, above you can observe the P (performance) score. The results are all done with a GeForce GTX 280 graphics card. Both processors make the scores faster than a Core 2 E8400.

* ed note - small mistake in the chart, double 7750 entry / q6600 missing.

3DMark Vantage has a standalone CPU test. It's very multi-core and multi-threading aware, so it was no surprise to see the Core i7 kick in real hard. If you exclude the i7 for a second and compare to say the Core 2 Quad Q6600 processor, you can see the massive leap forward Phenom II made.

And overclocking the processors brings their CPU scores towards ~10,200 points. And that is a mighty fine score really. But let's leave the synthetic benchmarks behind us and startup some games.

26 pages « < 20 21 22 23 next »

AMD Phenom II X6 1075T, X4 970BE and Athlon II X4 645 processor review
We test three AMD processors today, the Phenom II X6 1075T, Phenom II X4 970BE and Athlon II X4 645. They are part of the AMD Q4 processor product line update, arming their processor lineup with more value and higher performing CPUs.

AMD Phenom X4 945 and 955BE processor review|test
Today AMD is releasing two processors in the Phenom II line-up, the Phenom II 955BE and the Phenom II X4 945 processor. Both processors can be considered and positioned in AMDs high-end segment, yet will be priced friendly. Yields are good, clock frequencies go up, performance goes up. And that's nice as the Phenom II series processors offer great performance for the money you have to lay down on the table. AMD Phenom series processors are slowly ripening, and are aging like fine wine (they get even better over time). Guru3D brings you an in-depth performance review and architectural overview on both these processors. Oh yea .. and we'll overclock the living daylights out of it as well.

AMD Phenom II X4 810 and X3 720BE review (AM3)
A test on AMD Phenom II X4 810 and X3 720BE review socket AM3 processors. Socket AM3 Phenom II processors. Processors that are pretty much the same as the Socket AM2+ processors yet now with a DDR3 memory controller. DDR3 memory will allow the overall performance of the platform (your PC) to gain again a little in speed. Over the next few pages we'll tell you all about these new processors, their specifications and of course will check out performance.

AMD Phenom II X4 920 and 940 review test
AMD Phenom II 940 and 920 test. AMD releases the new Phenom II processors. Now manufactured at a much smaller fabrication processes, 45 nanometer, and has different amounts of cache. The result... their processors can now run at 3.0 GHz fairly easy, run cool and still have enough headroom for a nice tweak or two. Pretty significant, pretty interesting.