Product showcase – Interior

Product Showcase - Interior

Typically (in older cases), you’d need to take out the motherboard to install a new cooler. The giant cut-out for your cooler’s backplate should make life easier. With the solution mentioned above, you can reach it from both sides without the unpleasant experience of removing your motherboard from the chassis. Still, it’s temporarily blocked by a removable drive cage.

There are two cut-outs with rubber grommets on the right side of the motherboard and two ones above it. The cut-outs below the M/B don’t have the grommets.

There’s up to 12 cm for the combination of the fan and the radiator at the side. There is a place for up to 360 mm radiator or three 120 mm fans at the bottom of the chassis. The same applies to the top of Lian Li O11 Dynamic EVO.

At the side, you can see a place for three 120 mm fans (or two 140 mm ones), or you can install an LCS there, provided that it’s nothing more extensive than a 360 mm rad. 

A 120 mm fan can be installed at the back; it’s possible to choose the height of securing it.

The case has 8 PCI card slots secured with thumbscrews.