Product Showcase - the finished build
Product Showcase - the finished build
You’ll find photos of the finished build inside the Lian Li O11 Dynamic EVO on this page. The GPU we used here is an air-cooled RTX 2080 Ti, and the CPU is cooled (for measurements) either with air (and it’s Deepcool AS500) or with a liquid cooler, with the rad placed at the side of the case.
The NZXT Kraken X62 was used for this photo section. The motherboard is an ATX form factor one, based on the X470 with AMD Ryzen 7 3700X instead of the Z390 chipset, with an Intel i9 9900K used that we used for some time. The GPU comes from Gigabyte, the Gaming OC version (GeForce RTX 2080 Ti). The final result looks excellent.
No issues were installing the components inside.
Overall, fitting all the cables of the test setup in the case wasn’t tricky (the amount of space for the wires at the back is sufficient). The main leads disappear nicely into the rear through the forward-facing grommets, which adds to the overall cleanliness. The EPS power cable didn’t need to be pre-routed before we attached the motherboard to the tray.
