Product showcase – Interior
Product Showcase - Interior
Typically (in older cases), you’d need to take out the motherboard to install a new cooler. The giant cutout for your cooler’s backplate should make life easier. With the solution mentioned above, you can reach it from both sides without the unpleasant experience of removing your motherboard from the chassis.
There are two rubber grommets on cutouts on the right side of the motherboard.
The case has 7 PCI card slots secured with screws with thumbscrews.
There’s about 8 cm for the radiator at the front (if you'd leave the fans in the default position).
At the front, you can see a place for three 120 mm fans (or two 140 mm ones), or you can install an LCS there, provided that it’s nothing more extensive than a 360 mm rad.
There are two FD Aspect 140 mm FWM fans provided.
At the top can see a place for two 120 mm fans (or two 140 mm ones), or you can install an AIO, not more significant than a 240 mm variant (and the RAM can’t be higher than 35 mm). There are no provided fans here.
There’s no 120 mm fan pre-installed at the back. You can easily mount a 120 mm AIO in there instead.
Also – there’s an option to mount an 80 mm fan at the expansion slots (from the 4th one from the top).