Download AMD Radeon Software Crimson 16.2 driver

Published by

Click here to post a comment for Download AMD Radeon Software Crimson 16.2 driver on our message forum
data/avatar/default/avatar30.webp
Core clocks may not maintain sustained clock speeds resulting in choppy performance and or screen corruption. At this point I don't know should I laugh or cry...maybe a little bit of both.
https://forums.guru3d.com/data/avatars/m/209/209146.jpg
Well they are acknowledging it so hopefully a fix won't be too far away now, though it's been like what almost seven months or so since it was first brought up? For now though the Clockblocker program found in one of the pinned topics in this forum section works pretty well to maintain full 3D speeds for GPU's that have that downclocking or clock fluctuation issue. 🙂 (Curiously in my case the screen corruption bug disappeared entirely when I switched monitors, so far I'm leaning towards it being a issue with Display Port 1.0 or 1.1 or whatever my previous monitor was using as the current one uses version 1.2 but there's definitively more to it than just that.) (Only ever triggered on certain web pages though and never in games though a few games - Arkham Knight and Assassin's Creed Syndicate in particular - were prone to crashing the display driver when run in fullscreen mode but borderless has resolved that issue and if it was a clock fluctuation issue then Clockblocker should have that solved as well until AMD effing fixes the damn thing properly which they really should have by now, it's not exactly a minor issue. :P )
data/avatar/default/avatar25.webp
Tested on my laptop with newest Intel .4380. I should say that some games are choppy and screen has some artifacts. Witcher 3 avarage 28 fps with vsync. In Ashes of the Singularity(DX11) Avarage 4 fps. DX12 avarage 14 fps. I see some improvments. p.s. I installed CCC from 15.1.1 like OnnA said.
data/avatar/default/avatar19.webp
The division worked great without this driver and im sure it will work great with whatever they have done im always happy with amd because i never have any issues with any driver
Like I said, some people just wanted a fix for their problem(s), not The Division profile they probably don't care about. I also have no other issues other than per-game settings profile not working, but that doesn't mean others' problems are less valid.
https://forums.guru3d.com/data/avatars/m/260/260114.jpg
Tested on my laptop with newest Intel .4380. I should say that some games are choppy and screen has some artifacts. Witcher 3 avarage 28 fps with vsync. In Ashes of the Singularity(DX11) Avarage 4 fps. DX12 avarage 14 fps. I see some improvments. p.s. I installed CCC from 15.1.1 like OnnA said.
Me too 🙂 lol they still need to upgrade Crimson CCC Functionality. I need it for my CRT to play with Gamma. New Games are very Dark on CRT (LCD lol) So in Tray I have Gamma Profiles: Desktop 1.2 Gaming 1.5 & 1.65 Then its OK :3eyes: I still need to Test it in Games, some say 3-4% Better Gaming than last One. I think they improved Fiji more. But Temps are lowered by 2deg when surfing Net 🙂
data/avatar/default/avatar37.webp
Something strange... Vulkan driver has full compability with OpenGL 4.5 on my R9 270, but this driver have 91% again 🙂 After replacing a few files: atig6pxx.dl_, atig6txx.dl_, atiglpxx.dl_, atio6axx.dl_, atioglxx.dl_ i have 100% again... interesting, it's realy works or not 😀 OpenGL® Version - 6.14.10.13430 :P
data/avatar/default/avatar14.webp
High idle temp bug. Around 60ºc Good Job AMD.
it's proly fan control, broken ever since Crimson I don't notice it, because of my bigass sink 40ºC while watching youtube, fan stays at 20%=600RPM as opposed to 90ºC with stock fan(i**** u not)
Well they are acknowledging it so hopefully a fix won't be too far away now
indeed. Core clocks may not maintain sustained clock speeds resulting in choppy performance and or screen corruption <- sounds bad, but not acknowledging it, is far worse.
data/avatar/default/avatar16.webp
Guys, do not work automatic update for me. What`s the problem? Driver 16.1.1 now. Videocard AMD 7990. PS. Sorry for my English.
data/avatar/default/avatar26.webp
Guys, do not work automatic update for me. What`s the problem? Driver 16.1.1 now. Videocard AMD 7990. PS. Sorry for my English.
Do not rely on Automatic Update. I had it download hotfix 1(which was already installed!), at the time when hotfix 2 had already been a week old. http://support.amd.com/en-us/download
data/avatar/default/avatar16.webp
- 16.2 running well here, via Win10 (Build 14721.rs1) - so far, so good.. :)
https://forums.guru3d.com/data/avatars/m/259/259654.jpg
Something strange... Vulkan driver has full compability with OpenGL 4.5 on my R9 270, but this driver have 91% again 🙂 After replacing a few files: atig6pxx.dl_, atig6txx.dl_, atiglpxx.dl_, atio6axx.dl_, atioglxx.dl_ i have 100% again... interesting, it's realy works or not 😀 OpenGL® Version - 6.14.10.13430 :P
I can confirm that this driver does not contain the OpenGL/Vulkan versions of the Vulkan release driver. My guess is that it will take them another release to merge the branches. I'm uploading the DLL as we speak.
data/avatar/default/avatar25.webp
Custom resolutions work fine here , or I mean I can press accept. Try reinstalling, or try to chance it to english and see if it makes difference.
https://forums.guru3d.com/data/avatars/m/262/262085.jpg
anyone still having to turn on VSR after every reboot? it has not stuck on for me since the first crimson driver
https://forums.guru3d.com/data/avatars/m/119/119475.jpg
Ok here the idle bug continues. I mean the memory clock continues to work as if it is on load at 1200MHZ Core clock is working well, it gets to idle and load state when needed. About the Overhead API, DX11 the results stays the same, altough on DX12 it recieved a massive improvement. from 7 851 820 to 8 277 381
That problem happens only when using Overdrive? I've noticed the same with a 7870 only when it's enabled with previous crimsons, but if OD is never enabled after installing the driver and clocks are set with MSI AB, clocks will be OK in idle.
https://forums.guru3d.com/data/avatars/m/198/198862.jpg
8166 points in firestrike (9631 graphics). AMD is pushing GCN 1.0 to its limits. With every new driver slight increase.
data/avatar/default/avatar09.webp
Hello. Running Win 10. Installed these drivers after uninstalling 16.1, restarting running latest DDU and then installing. Running a few games I had downclocking issue. I installed clocking program found here. It did boost gpu to max, but performance was real bad in the games I normally played. So I've uninstalled 16.2 and gone back to 16.1. Performance is back to what it was before. This is on a laptop using Amd Kaveri apu.
data/avatar/default/avatar38.webp
Core clocks may not maintain sustained clock speeds resulting in choppy performance and or screen corruption.
That seems like a pretty big "known issue."