AMD AM5 AGESA Firmware Update Enables DDR5-8000 Support
Click here to post a comment for AMD AM5 AGESA Firmware Update Enables DDR5-8000 Support on our message forum
devastator
got my g skill 6400 32c up to 6600 32c on ryzen 5 7600x and asrock lighting try 6800 34c which fail may need to go 35c or even 36c for it to work
devastator
tried for about 1hr just couldnt get it any highter cant complane i got 400mhz more then before this bios came out just wanted to get 7000
CPC_RedDawn
Any sites with BIOS downloads for the new 7000 series chipsets. I remember a site for AM4 that listed all the new stuff but can't find one for AM5?
chispy
https://www.overclock.net/threads/asus-rog-crosshair-x670e-overclocking-discussion-thread.1799959/page-304#post-29215084
On that thread there is new bios for Asus boards. Good luck , have fun amigo 🙂 , also if you search at ocn under amd motherboards , there are threads with support for Asus , gigabyte , asrock ,msi.
I hope this helps.
Undying
Still no new bios for asus b650.
Lukart
Cool stuff, now we need to see how the performance scales.
VaultDweller
Hmmm I wonder if they are going to bring this to the Aorus X670E which would mean I can run my 7600Mhz GSkill on it.
Valken
Hilbert, we need to see AM5 vs Z790 DDR5-8000 Battle!
Kaleid
Hope it's better than 1.0.0.7a Patch A cos that one causes lots of BSOD for me
VaultDweller
It will be interesting to see how well the 7600Mhz DDR5 GSKill XMP kit runs, I was tightening the timings on it and had it at 30-36-36-76 @ 6200Mhz 1.28v vddq 1.18vdd 1.25 vsoc before .7A nerfed it down to same timings but only at 6000.
VaultDweller
That is assuming that it will be available for the b650, so far I have only seen mention of X670E or are you meaning that there is no new BIOS for the ASIS B650 as just a general bios related comment? I mean they say "other" but is this to the AM5 platform in general or the X670E AM5 specifically?
VaultDweller
In my case the .7a seemed to nobble a lot. Looking forward to getting beyond it.
Horus-Anhur
Check this out:
https://www.hardwareluxx.de/community/threads/am5-agesa-uefi-bios-info-laberthread.1323294/page-13
devastator
anyone know how to increase voltage on a asrock x670e ligthing pg as i not sure which setting to touch it was easy on a msi board and asus just understand this board maybe bit more volt with help me get pass 6600 on 1.4v at the monment
Horus-Anhur
Voltage for what? SoC?
If it's for SoC, 1.4v is too much.
devastator
no it for the ram and it 1.4 was the build in setting for 6400mhz emp
Horus-Anhur
9058 MT/s by overclocker HiCookie 😱
devastator
sold my gskill 6400 32c for 90pounds on ebay ordered some new g skill 7600 36c for 200pounds
H83
So, i`ve bought 32 gb of RAM running at 6000Mhz because it was the optimal seepd for AM5 and because the boards/CPUs couldn`t reach much higher speeds than 6400Mhz and now suddenly a new firmware enables speeds ip to 8000Mhz!...
Now i`m wondering if i made a good choice regarding my RAM purchase...
TLD LARS
I too bough 32GB 6000 sticks, If yours are 30 40 40 96 or something close to that it is probably A die anyway, so they would be able to run 7000 or 8000 but at looser timings, so they would not be one setting XMP/EXPO and go, but just as capable if you get the timings right.
You could also just run them 6200-6400 and keep the same timing and 1:1 clocks if they are able to do that.
My 2 month old G-skill sadly does not have 100% contact between the memory modules and the heatspreader, air is visible between the chips and the thermal transfer tape, so my temps are mid 60 degrees at rated speeds already.
G-skill will not RMA them if they run rated speeds, so I may not be able to run mine higher then 6000 anyway unless I disassemble my new modules and replace the tape with something else.
