Installation #2 - Hardware
Once we have hooked up everything on the antenna/CAI/cable section it's time to connect the linkbox. That one linkbox cable we connected to the splitter goes to the white TV/R Out connection. The yellow connector is used to connect towards your graphics cards (composite signal). The black and Red connectors are connected towards your soundcard with a supplied cable (one size fits all), the black 9-pin connector goes to your PC's serial port and the SVideo like TX/RX connector connects towards the remote receiver module.
This is the remote receiver module.
This is what it will look like when we connect all cables properly. To your far left you can see the power adapter input btw.
This is the remote. As stated before, no infra-red here. This thing goes through walls and worked in my entire house. The remote control communicates wirelessly with the PC and has an indoor range of 40 meters.
Once everything is hooked up and you turn on the PC the PalmButler goes live :)