For the majority of graphics cards, a simple set of methods can be used to slightly increase overall performance. Typically, you can adjust the frequency and voltage of the core GPU clock. By boosting the memory and GPU frequencies on the video card, we may improve the video card's computation clock cycles per second. It may sound complicated, but it can be accomplished in less than a few minutes. I always recommend to novice users and novices not to increase the frequency of the core and memory clocks by more than a few %. Example: If your GPU operates at 1500 MHz, I recommend increasing the frequency in increments of 25 MHz. Advanced users frequently increase the frequency significantly. When your 3D graphics begin to exhibit anomalies such as white spots ("snow"), you should often reduce the clock speed by 25 MHz and leave it at that. Typically, when you overclock your GPU excessively, it begins to exhibit abnormalities, empty polygons, or even freezes. Locate that limit with care and then reduce it by at least 25 MHz from the time you observe an artifact. Take a close look and make detailed observations. I'm not sure why you'd need to overclock today's tested card in the first place, but we'll demonstrate it nonetheless. In conclusion, you always overclock at your own risk.
|Reference frequency||This sample||Overclocked|
|Boost Clock: 2500 MHz||Boost Clock: 2680MHz||Boost Clock: ~3000|
|Memory Clock: 20000 MHz||Memory Clock: 20000 MHz||Memory Clock: 21488 MHz|
With AfterBurner (download here) you can tweak the card. You'll see that most cards out there will all tweak to roughly the same levels due to all kinds of hardware protection kicking in. Our reference sample founder edition card does not have any power limiter allowance as opposed to what the AIB cards will offer. We can, however tweak the frequencies of the GPU and memory.
We applied the following settings:
- Activated BIOS mode 1 (performance)
- Power Limiter: +15%
- Dynamic GPU clock set at 3.250 GHz results in ~2.9 GHz effective
- Mem clock @2686 (= 21.488 Gbps effective)
- FAN RPM default
The results show respective default clocked results plotted in percentages. To the far right, where you can see "Aver Difference %", this is the result of the four games tested and averaged out.