Page 7

Overclocking & Tweaking

What is our goal ?
Before we dive into an extensive series of tests and benchmarks, we need to explain overclocking. With most videocards, we can do some easy tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or even tampering with Image Quality and then there is overclocking that by far will get you the best possible results.

What do we need?One of the best tools for overclocking NVIDIA and ATI videocards is our own Rivatuner, which you can download here. If you own a NVIDIA graphics card then NVIDIA actually has very nice built in options for you at that can be found at the display driver properties. They are hidden though and you need to enable it by installing a small registry hack called CoolBits, which you can download right here (after downloading and unpacking just click the .reg file twice and confirm the import).

How far can we take it ?
Overclocking: by increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard but it really can be done in less then a few minutes. I always tend to recommend to novice users and beginners not to increase the frequency any higher then 5-10% of the core and memory clock. Example: If your card would run at 300 MHz then I suggest you don't increase the frequency any higher than 330 MHz.

More advanced users push the frequency often way higher. Usually when your 3D graphics will start to show artifacts such as white dots ("snow"), you should go down 10 MHz and leave it at that.

The core can be somewhat different. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. I recommend that you back down at least 15 MHz from the moment you notice an artifact. Look carefully and observe well.

All in all... do it at your own risk. Overclocking your card too far or constantly to its maximum limit might damage your card and it's usually not covered by your warranty.

You will benefit from overclocking the most with a product that is limited or you may call it "tuned down." We know that this graphics core is often limited by tact frequency or bandwidth limitation, therefore by increasing the memory and core frequency we should be able to witness some higher performance results. A simple trick to get some more bang for your buck.

The x800 Pro at default clock speeds is doing 475 MHz. It's memory is 2x446 thus 892 MHz.

Overclocked it was capable of running at 500 MHz core and 1050 MHz memory frequency.

If you need help with tweaking or overclocking, I'd like to suggest you visit our discussion forums. We have selected categories for this.

Proper cooling is of course essential for a good overclock.

The Test System
We comes the time in this article where we tackle a number of benchmarks, but first let me show you our test system.