ECS H67H2-I motherboard review

Mainboards 328 Page 5 of 18 Published by

teaser

Power Consumption and temperatures

Sandy Bridge Power Consumption and temperatures

Here's where we'll slowly move into actually testing the processors and respective chipsets.

The new Sandy Bridge based processors are a bit of a redesign alright and as a result they are quite energy friendly processors. What you'll notice a lot is that in idle these things kick ass in matters of power consumption, whereas at peak TDP they behave quite normally.

Example: a processor like the Core i5 2500K for example consumes only 106 Watts, and that is with all cores stressed, and that's including a reference H67 chipset, one solid state drive, the memory and active cooler, no dedicated graphics card. Once that processor goes into an IDLE state (and again -- without a dedicated graphics card) we measure merely 34 Watts IDLE power consumption. And that's just wicked.

We use a 2600K processor today that utilizes a bit more power.

Unfortunately, once you insert a dedicated graphics card things change quickly. When we add a GeForce GTX 580 for example that IDLE power consumption jumps upwards.

The ECS motheboard demands a little more power though that can be tweaked in the BIOS as you'll get several power state options.

  • We idle at 37 Watts and peak at 115 Watts without a graphics card installed.
  • We average out at roughly 78W idle (with a GeForce GTX 580 - 8GB Memory and one SSD installed). And once we stress the CPU cores overall power consumption went up towards 138W.

ECS H67H2-I Mini-ITX motherboard

The slightly higher wattage compared to reference products can be explained due to the use of extra chips, like the USB 3.0 controllers, Hydra IC, PLX switch chip, extra SATA controllers, VIA HUB and so on. This differs per motherboard.

ECS H67H2-I Mini-ITX motherboard

Overclocking was not an option with this board; temperature wise, the 2600 processor was showing normal numbers. The results above are based on the tested motherboard, reference clock frequencies and an Intel CPU cooler (we installed the stock oem cheapo cooler, not the high-end heatpipe model). Per core temps will peak to roughly 65~70 Degrees C with that Intel stock cooler. Yeah, get a proper cooler.

Share this content
Twitter Facebook Reddit WhatsApp Email Print