ASUS Crosshair V Formula review

Mainboards 327 Page 13 of 23 Published by


Performance - Dhrystone | Whetstone | Queen


Monitor Setup

Before playing games, setting up your monitor's contrast & brightness levels is a very important thing to do. I realized recently that a lot of you guys have set up your monitor improperly. How do we know this? Because we receive a couple of emails every now and then telling us that a reader can't distinguish between the benchmark charts (colors) in our reviews. We realized, if that happens, your monitor is not properly set up.


This simple test pattern is evenly spaced from 0 to 255 brightness levels, with no profile embedded. If your monitor is correctly set up, you should be able to distinguish each step, and each step should be roughly visually distinct from its neighbors by the same amount. As well, the dark-end step differences should be about the same as the light-end step differences. Finally, the first step should be completely black.

DhryStone CPU test

We make use of a multi-threaded Dhrystone test from SiSoftware Sandra, which is basically a suite of arithmetic and string manipulating programs. Since the whole program should be really small, it fits into the processor cache. It can be used to measure two aspects, both the processor's speed as well as the optimizing capabilities of the compiler. The resulting number is the number of executions of the program suite per second.


First up, The SANDRA DhryStone and Whetstone tests. These two tests are pure unadulterated 100% CPU tests that run completely within the CPU + cache memory itself. A perfect test to see the general efficiency per core. Though one of the oldest, Dhrystone remains a simple yet extremely accurate and effective way to show you RAW CPU processing performance making it a very good indicator. The rest of the processors are in the charts just for scaling.

So then, let me first explain how and what we will be testing and comparing in this article. Due to the nature of changes in our benchmark software we'll try to add many processors per benchmark title for you to compare to.

Your main focus should be on the orange bars.

  • Lower orange bar: Today's tested motherboard with the Phenom II X4 980BE processor at its respective default clock frequencies and system set at BIOS defaults, memory is left at 1333 MHz CAS9.
  • Top orange bar results are the ones with at overclock at 4300 MHz

We also included several other Phenom II X4 980 / 990FX platforms from Gigabyte and ASUS. Then the other processors/mobo entries are there for CPU and respective platform scaling throughout the benchmark session.

Whetstone FPU

The Whetstone benchmark is a synthetic benchmark for evaluating the performance of computers. It was initially written in Algol 60, back in 1972. The Whetstone benchmark originally measured computing power in units of kilo-Whetstone Instructions Per Second (kWIPS). This was later changed to Millions of Whetstone Instructions Per Second (MWIPS).

The Whetstone benchmark primarily measures the floating-point (FPU) arithmetic performance. A similar benchmark for integer and string operations is thus the Dhrystone.  

Queen CPU test

This simple integer benchmark focuses on the branch prediction capabilities and the misprediction penalties of the CPU. It finds the solutions for the classic "Queens problem" on a 10 by 10 sized chessboard. At the same clock speed, theoretically the processor with the shorter pipeline and smaller misprediction penalties will attain higher benchmark scores. For example -- with HyperThreading disabled -- the Intel Northwood core processors get higher scores than the Intel Prescott core based ones due to the 20-step vs 31-step long pipeline. However, with HyperThreading enabled the picture is controversial, because due to architectural bottlenecks the Northwood core runs out of internal resources and slows down. Similarly, at the same clock speed AMD K8 class processors will be faster than AMD K7 ones due to the improved branch prediction capabilities of the K8 architecture.

CPU Queen test uses only the basic x86 instructions, it consumes less than 1 MB system memory and it is HyperThreading, multi-processor (SMP) and multi-core aware and is thus a multithreading CPU Benchmark with MMX, SSE2 and SSE3 optimizations.

Share this content
Twitter Facebook Reddit WhatsApp Email Print