The hotfix addresses the following issues: [Ampere] Chrome/Edge may experience random TDR while browsing [3195894] [G-SYNC][Edge of Eternity/Hitman 2]: The games experience stutter and low FPS when Hardware-accelerated GPU scheduling in windowed mode [200685971] Wallpaper Engine app may crash on startup or upon resume from sleep. [3208963] [461.40] LG CX OLED TVs (2020) are not recognized as G-SYNC Compatible displays [3244055] [Surround][RTX 30 series] PC may display no signal message when enabling NVIDIA Surround [3230565] On some Notebooks ‘Maximum Graphics Power’ information missing in NV Control Panel - System Information [200697069]

Huh, when installing these drivers it's like the first time I got a Windows notification asking for PC reboot to finish the driver installation. I don't think I ever had that notification before when installing Nvidia drivers.

A last!!! The Chrome tab flicker is actually gone!! Although installer didn't work on my side... Had to manually force install these drivers. But they work! ***Edit: scratch that.. after restarting, it's a flicker fest.

linoleum:

A last!!! The Chrome tab flicker is actually gone!! Although installer didn't work on my side... Had to manually force install these drivers. But they work! ***Edit: scratch that.. after restarting, it's a flicker fest.

Give this a try: https://nvidia.custhelp.com/app/answers/detail/a_id/5157/

ManuelG:

Give this a try:/

Do you have any ETA on when there will be a driver for World of Warcraft Shadowlands that makes it stop flickering like crazy?

linoleum:

A last!!! The Chrome tab flicker is actually gone!! Although installer didn't work on my side... Had to manually force install these drivers. But they work! ***Edit: scratch that.. after restarting, it's a flicker fest.

Strange that I use Opera (also Chromium-based) and the flicker is gone since 461.09 drivers here... Gsync enabled on a 165hz panel... Clean, after DDU install time maybe??

ManuelG:

Give this a try:

OMG I had stuttering and freezing issues on some windows especially VLC with anything other than the OpenGL renderer WHILE resizing them and this fixed it. Everyone talks about flickering and I thought this has nothing to do with my issue. Seems it totally is!

Johannah:

Do you have any ETA on when there will be a driver for World of Warcraft Shadowlands that makes it stop flickering like crazy?

We made a small change in this driver that solves or reduces the flicker for many users but a real fix is still being worked on.

WOOO FINALLY a fix for the HW-accel TDRs. For the record, they are not restricted to chrome, they also happen in just about every hardware-accelerated desktop window and especially when you have multiple open e.g. Firefox, Anydesk, MPC-HC The problem always was i do not get eventlogs or dumps when they happen, so there is nothing to send to Nvidia. I will know by monday if it actually fixes it 🙂 EDIT: Reddit comments say the issue persists. Not encouraging

This driver gives me artifacts everywhere on 3080 Rolled back, works fine now

Razunter:

This driver gives me artifacts everywhere on 3080 Rolled back, works fine now

your overclock is unstable. ie, the vendor overclock is unstable.

After switching to 3080 i noticed my chrome was flickering if i minize or resize it, or just move it from 1 screen to another. The weird thing is i found a fix but its retarded, i use "Rainmeter" to show my ram/cpu usage as a widget on the desktop, and after i installed those back after the gpu switch and windows reinstall, the flickering was gone.. Not sure how they're related.

IceVip:

After switching to 3080 i noticed my chrome was flickering if i minize or resize it, or just move it from 1 screen to another. The weird thing is i found a fix but its retarded, i use "Rainmeter" to show my ram/cpu usage as a widget on the desktop, and after i installed those back after the gpu switch and windows reinstall, the flickering was gone.. Not sure how they're related.

its the MPO issue. Refer to Manuel's post above.

tfam26:

Egads, overclocking Ampere? You're better off putting a tremolo bar on a tuba.

no joke.

tfam26:

Egads, overclocking Ampere? You're better off putting a tremolo bar on a tuba.

I do agree that modern components are not really OC friendly in a sense that they are usually already pushed to the max. But on the other hand i yet have to see an ampere card that cant do +1000 on the memory rock stable.

Providing a bit more power to them via GeForce Experience seems like it helps particularly the 3090 but I don't know how well a manual overclock would work compared to just letting the boost algorithm scale it within it's various parameters although the memory states could be a bit more flexible if it's about these. Not much of a overclock though it's just adding a bit extra for the GPU to utilize before it throttles compared to modifying voltages or the clock speed or curvature for it I think is how it works now. As for memory flexibility well sorta, might be a bit of a range on them like on AMD as well with error correction kicking in so it runs all the way up to near maximum without artifacts but the ECC makes for limited or reduced performance gains and scaling it back instead is more gainful. Not sure how sensitive Ampere and GDDR6X is though AMD RDNA1 was fairly sensitive and RDNA2 while a bit better is both locked at a fairly low maximum and tends to hit ECC early on so testing is needed to confirm if it really works or not. 🙂 EDIT: Actually was there even any data on that I think Micron had something like ECC but not quite the same but the available info was more limited from what I remember of trying to look it up at least. EDIT: Forward Error Correction. https://www.anandtech.com/show/15978/micron-spills-on-gddr6x-pam4-signaling-for-higher-rates-coming-to-nvidias-rtx-3090

tfam26:

Why? 🙂

mining? just a guess, sorry for using a "dirty word" . .

I'll better wait for the next WHQL one, the past couple drivers since december did all not fix my issues with stuttering/microfreezing several programs while opening or closing them. Also opening NVCP or Windows Display settings caused a small lag/freeze also. The past 3 drivers messed up my monitor too, sometimes upon boot it switches randomly from RGB to YCBRxxx and requires to change it in NVCP back, but it doesn't change until another reboot and changing it again from YCBRxxx to RGB to finally stick. This drives me mad for weeks now. Only happens when games force fullscreen or some random spastics when you run the game in borderless but it still goes from windowed to fullscreen to your settings (Star Wars Battlefront 2 2017) while booting up....had the same issue with BF V, but only on one monitor with my 3 monitor config. Now it happens on all 3 monitors whenever i boot up a game all 3 monitors flicker/turn black and mess with my desktop icons until the game really started and wents to borderless. I think it's the games fault tho. @ManuelG Systems specs: RTX 3090 Asus Strix oc, factory oc with silent profile - latest VBIOS ASUS VG27AQ as main monitor, Dell S2417DG as left and ASUS VG248QE as right. All on 144hz MAXIMUS XII Formula with latest bios 10900k stock turbo settings G.Skill 4000mhz CL15 RAM 32GB Latest windows update, included optional ones.

Thanks guys and girls at Nvidia. Fixed issue with G sync on my LG 48cx. seems good for games at the moment too. Oh yeah..

Dissaster driver in The Division 2 on 1080ti. Perfect with 461.40