Download AMD Radeon Software Crimson 16.7.1 driver

Published by

Click here to post a comment for Download AMD Radeon Software Crimson 16.7.1 driver on our message forum
#5302481
https://forums.guru3d.com/data/avatars/m/238/238369.jpg
Installing now via Crimson Updates. Seems like only fixes for 480.
#5302482
https://forums.guru3d.com/data/avatars/m/198/198862.jpg
Seems like only fixes for 480.
Seems like it. Gonna do it anyway tho and report back.
#5302487
data/avatar/default/avatar08.webp
is AMD WattMan avaible for older graphic cards in this driver?
#5302491
https://forums.guru3d.com/data/avatars/m/198/198862.jpg
is AMD WattMan avaible for older graphic cards in this driver?
No its not.
#5302493
data/avatar/default/avatar29.webp
Still overdrive here on r9 380.
#5302494
data/avatar/default/avatar26.webp
is AMD WattMan avaible for older graphic cards in this driver?
Nope.
#5302509
https://forums.guru3d.com/data/avatars/m/181/181713.jpg
Installed, will see if it changed anything in The Division, for some reason I expected Wattman figures to have changed when switching to manual after the new driver but it shows the same...
#5302548
https://forums.guru3d.com/data/avatars/m/243/243702.jpg
Installed, will see if it changed anything in The Division, for some reason I expected Wattman figures to have changed when switching to manual after the new driver but it shows the same...
If you are using HWiNFO64, you may check measured power consumption before and after driver update. (That's if RX-480 is already supported. But it uses same VRMs control chip as Fiji, so...)
#5302550
data/avatar/default/avatar28.webp
assuming you've turned on compatibility mode. the powerphase redistribution wont change anything.
#5302554
data/avatar/default/avatar02.webp
AMD give us WattMan 🙂
#5302598
https://forums.guru3d.com/data/avatars/m/209/209146.jpg
Vulkan runtime was updated from 1.0.13.0 to 1.0.17.0 though the new redist is missing some PowerShell scripts though that's probably not a huge issue, probably also why it's about 600 KB large now instead of 13 MB. Profile wise for Torchlight 2 it corrects what I assume is a type by altering. CrossfirePröf to CrossfireProf And there's a "HighPerfGPUAffinity" flag for Overwatch now. Driver version is about identical to 16.6.2 only changing the secondary version number from 16.20.1035.0 to 16.20.1035.1001
#5302608
https://forums.guru3d.com/data/avatars/m/164/164033.jpg
Installed, will see if it changed anything in The Division, for some reason I expected Wattman figures to have changed when switching to manual after the new driver but it shows the same...
Should distribute more of the power to the 6 pin connector then pci-e. With compatibility mode it should bring down the usage as whole.
#5302630
data/avatar/default/avatar13.webp
Pls delete. Wrong thread.
#5302656
https://forums.guru3d.com/data/avatars/m/264/264746.jpg
What the hell they are doing with servers? Download is slow as hell.
#5302659
https://forums.guru3d.com/data/avatars/m/262/262197.jpg
What the hell they are doing with servers? Download is slow as hell.
if it is really bad... ->cancel and retry, sometimes you just got a bad route. i just downloaded with 100mbit in few seconds.
#5302803
https://forums.guru3d.com/data/avatars/m/249/249226.jpg
Delete please. Thanks.
#5302806
https://forums.guru3d.com/data/avatars/m/243/243702.jpg
http://***************/not important
Maybe because people have reading comprehensive problems? It takes like 2 seconds to notice that it is not their article. It is from PCPer. And therefore it would take you one click. And putting their link here would give credit to those who deserve it. (Just saying.)
#5302815
https://forums.guru3d.com/data/avatars/m/249/249226.jpg
Maybe because people have reading comprehensive problems? It takes like 2 seconds to notice that it is not their article. It is from PCPer. And therefore it would take you one click. And putting their link here would give credit to those who deserve it. (Just saying.)
Damn! i didnt know that really sorry, hope an admin delete my msgs including your quote.. sorry
#5303291
https://forums.guru3d.com/data/avatars/m/260/260114.jpg
Somebody please Test Mantle in BF:4/H CIV, Thief and Sniper in this one. I've just already copied Repsitory 15.12 ver. Mantle driver: 9.1.10.99 API: 98309 On this one it is working flawlessly :flip2: Also on this new 16.7.1 BF1 working much better, i think they optimise DX12 and 11.3 even better than in the last one 😱

Next Page