Core i7 8700K OC at 4800 MHz 1.3 volts
Core i7 8700K OC at 4800 MHz 1.3 volts
1.3 V and higher voltages can cause serious problems for Coffee Lake CPUs because of the TIM used under the heat spreader (instead of a solder like in the Sandy Bridge range). Our (delidded) Core i7 8700K was set @ 4800 MHz, at 1.3 volts. Again, wPrime 2.10 (3 times 1024 M) has been used. IDLE temperature measurements are taken in the desktop operation, with almost no stress to the CPU.
The temps shouldn’t go beyond 90°C, as otherwise, the CPU might degrade and also throttling can occur (especially applicable to the AMD Ryzen range, which normally operates at lower temperatures). AIO coolers usually perform very well with our delidded Core i7 8700K. The SilentiumPC Navis 240 and 280 RGB were not any exceptions. Let’s try it with a voltage higher than 1.3 V.
Core i7 8700K OC at 4800 MHz beyond the 1.3 volts
There are five stages for the charts below:
- Default
- 4.8 GHz @ 1.3 V
- 4.8 GHz @ 1.35 V
- 4.8 GHz @ 1.4 V
- 4.8 GHz @ 1.45 V
First up is the stronger of the pack, the SilentiumPC Navis 280 RGB. Both AIOs managed to keep the CPU temperatures under control until 1.4 V. At 1.45 V the temps went north of 80 degrees Celsius (even with the 280 variant), but the final result is still good, and most users will not find this an issue.
