Patriot Viper Steel 4000 MHz CL19 DDR4 review -
Product showcase
Patriot Viper Steel memory is only available with heat spreaders in gunmetal colour. It comes packed in a black-grey cardboard box with white and red accents.
There is some information about capacity, frequency, and that’s all (nothing about XMP 2.0 or lifetime warranty – which applies here).
On the back, you’ll find only the overall info about the series, and standard social media links.
The internal packaging is a very typical clamshell design. It is a cheap but effective solution. The blister holds the 2 sticks securely. The radiators are integrated with the PCB by means of an adhesive pad on each side, and it would require significant strength (or heating up with a hairdryer for a longer period) to dismantle them, so I did not do it, and do not recommend it either. You’ll find two stickers inside the box, with the red Viper logo on a white background.
Here is what it looks like after unpacking. These are two 8 GB modules running at 4000 MHz. They look quite modest, definitely not flashy, and that’s good. You can see the black PCB here as well. The aluminum heat spreader has a polished finish.
The sticker tells you that it is a kit of 2 x 8 GB modules operating at 4000 MHz, with CL19, at 1.35 Volts. This should be satisfactory for the typical user/gamer, but if you process video or graphics, then you’d want more capacity. For the optimal performance, we recommend sticking to the settings from the preconfigured XMP profile.
The total height of stick is about 45 mm/1.75 inch. That’s a relatively low-profile module, so you shouldn’t have issues with most of the air coolers on the market, but as always: it’s best to double-check whether any interference might occur before buying this set.
Today, we are looking at Patriot Viper Steel RGB 3600 MHz CL20 (yes – 20!) memory in a 32 GB set consisting of two 16 GB modules. I can say that we’ve had our fair share of experience with Patriot RAM. We had an opportunity to test a similarly clocked kit (3600 MHz) from the Viper Steel series (so no RGB there), but the capacity was 2 x 32 GB back then, and the latencies were quite surprisingly better, at 18-22-22-42. Before that, we also reviewed one of the fastest 2 x 8 GB kits in the range, clocked at 4000 MHz with CL19 latency.
Patriot Viper Steel DDR4 3600 MHz (64GB) review
Today, we are looking at Patriot Viper Steel 3600 MHz CL18 memory in a 64 GB set consisting of two 32 GB modules. At the beginning of 2019, we had an opportunity to check a higher-clocked kit from that series (4000 MHz), but the capacity was 2 x 8 GB. Patriot’s Viper Steel Series is offered at speeds ranging from 3000 MHz up to 4400 MHz, with XMP 2.0 support.
Patriot P200 1TB SATA3 SSD Review
Mid-July Patriot announced its P200 SATA SSD, intended as a storage solution with a really good price. We had the opportunity to test the 1TB model. This SATA SSD was built with Silicon Motion or Maxi...
Patriot Viper VPN100 M2 NVMe 512 GB SSD Review
At the end of March, Patriot released its Viper VPN100 M.2 SSD model, intended to be a really fast NVMe drive with good pricing. We had the opportunity to test the 512GB model. This M.2. NVMe SSD was ...