Noctua NH-D14 review

Cooling 190 Page 7 of 8 Published by

teaser

Extended overclock sessions versus temperatures

Extended overclock sessions versus temperatures

Now since we have such high-end cooling in the house we definitely should have better tweakability on the processor,

I was wondering where I'd end up with a quick overclock session. So we popped in a Core i7 870 processor for a good reason, we had a peek at a selection of stages in overclocking and it's respective temperatures, have a look at the following results please.

That is quite something really, let's break it down.

Processor | configuration - Temps in Degrees C

Idle

100%

NH-D14| i5 750 2,67 GHz  

24 (75F)

41 (106F)

NH-D14 | i7 870 3,36 GHz | 1,3v| 80%RPM

28 (82F)

49 (120F)

NH-D14 | i7 870 3,96 GHz | 1,4v| 80%RPM

30 (86F)

59 (138F)

NH-D14 | i7 870 4,30 GHz | 1,5v |80%RPM

37 (99F)

68 (154F)

So as you can see, when we take this Core i7 processor up towards 4 GHz we see that the temperatures are not at all an issue -- whatsoever. With the processors stressed we max out at less than 60 Degrees C -- at 4 GHz and a CPU voltage of 1.4 Volts. We average out the temperatures of the four CPU cores btw.

Mind you that we measure at a room temperature of 21 degrees C, in hot countries the ambient temperature obviously will also have a (negative) effect on overall cooling performance.

But since we only push 59 Degrees C  .. my fingers got a little itchy, At this stage we where wondering if we'd be successful in overclocking the processor above 4 GHz, and so we did. We took it successfully and stable towards 4.3 GHz with 1.5 Volts pumped into the processor. The end result, with the processor cores stressed out 100%, is still stunning .. a temperature that is still hovering at acceptable levels at 70 Degrees C  at 68 C / 154F.

Noctua NH-D14

Share this content
Twitter Facebook Reddit WhatsApp Email Print