Product Showcase
Product showcase
The provided fans are the G.Skill 120 mm model. You get three of them. The fans have a black, plastic frame with 9 blades. Anti-vibration pads are provided on the mounting corners, and that’s a nice addition. The basic specifications are listed below:
• Fan Dimensions: 120 x 120 x 25 mm
• Fan Speed: up to 2100 RPM
• Control Mode: PWM
• 93.5CFM airflow
• 1.86mmH2O air pressure at the highest speed.
That’s the theory, but in reality, the range of useful RPMs is a bit wider (50 rpm on each end of the range).
As for the radiator, it’s a slim, aluminium one with many fins, so nothing that would surprise anyone. It’s 39.4 x 12.0 x 2.7cm, the latter value being the thickness. One thing that makes it stand out of the other products is the higher-density piping design.
The pump look is really, really attractive.
Two flat cables come out from the side of the block:
• 1x 4 pin for voltage
• 1x 3 pin aRGB connector (plugged into the motherboard)
The copper base could have used some more polishing and it's visible even with the pre-applied thermal paste.
The Enki 360 uses 420 mm long, flexible sleeved tubing. It’s an adequate length, even for a larger chassis. The tubing used has an 8mm inner diameter.
