When graphics cards produce a lot of heat, usually that heat needs to be transported away from the hot core as fast as possible. Often you'll see massive active fan solutions that can indeed get rid of the heat, yet all the fans these days make the PC a noisy son of a gun. Do remember that the test we do is extremely subjective. We bought a certified dBA meter and will start measuring how many dBA originate from the PC. Why is this subjective you ask? Well, there is always noise in the background, from the streets, from the HD, PSU fan etc etc, so this is by a mile or two an imprecise measurement. You could only achieve objective measurement in a sound test chamber.
The human hearing system has different sensitivities at different frequencies. This means that the perception of noise is not at all equal at every frequency. Noise with significant measured levels (in dB) at high or low frequencies will not be as annoying as it would be when its energy is concentrated in the middle frequencies. In other words, the measured noise levels in dB will not reflect the actual human perception of the loudness of the noise. That's why we measure the dBA level. A specific circuit is added to the sound level meter to correct its reading in regard to this concept. This reading is the noise level in dBA. The letter A is added to indicate the correction that was made in the measurement. Frequencies below 1kHz and above 6kHz are attenuated, whereas frequencies between 1kHz and 6kHz are amplified by the A weighting.
|TYPICAL SOUND LEVELS
|Jet takeoff (200 feet)
|Shout (5 feet)
|Heavy truck (50 feet)
|Normal conversation (3 feet)
|Bedroom at night
There's a lot of differences in measurements amongst websites. Some even place the dBA meter 10cm away from the card. Considering that's not where your ear is located, we do it our way.
For each dBA test we close the PC/chassis and move the dBA gun 75 cm away from the PC. Roughly the same proximity you'll have from a PC in a real-world situation. Above, the IDLE (desktop mode) results where the GPU hardly has to do anything.
The idle results remain brilliant, even with three cards.
For the card in a fully stressed status (in-game) in 2x Crossfire mode reaches 44 DBA, now that is quite audible already. It means you can strongly hear airflow. In 3-way Crossfire things got bad once the GPUs reached roughly 80 Degrees C, at 46 it becomes quite noisy.