Product showcase – interior

Product Showcase - Interior

Here, you can see two cable cut-outs to the right of the motherboard, all fitted with rubber grommets. 

The third one is placed below the tray. Due to the nature of this chassis, there is no PSU shroud in the main chamber (because normally the PSU is placed at the back).

At the top, you can see the removable fan/radiator tray.

At the front, there’s space for two 200 mm fans, or three 120 mm fans/two 140 mm ones.

No fans are pre-installed at the back, either. You can fit a 120/140 unit mm there. Alternatively, you can mount a 120/140 mm AIO there as well.

You can install up to three 2.5” drives at the back, below the backplate cut-out in the motherboard tray. There’s also a metal cover that conceals cables coming out of the PSU installed at the bottom. At the top side you can see the fan hub, which can really come in handy (it's powered by a SATA cable).

A total of four 3.5” trays (you can use 2.5” ones instead) are located toward the front of the case. Overall, you have four drive mounts in the Enthoo 719, and each of them can accommodate three HDDs.