Palit GeForce GTX 680 JetStream review

Graphics cards 1048 Page 6 of 26 Published by


Power efficiency - Dyn Clock Adjustment


Power efficiency

Moving towards a 28nm based chip means you can do more with less as the product becomes smaller, the GK104 GPU comes with roughly 3.54 billion transistors embedded into it. The TDP (maximum board power) sits at a very respectable 195 Watts. So in one hand you have a graphics card that uses less power, yet offers more performance. That's always a big win!

The Palit GeForce GTX 680 comes with tone 6-pin and one 8-pin power connectors to get enough current and a little spare for overclocking.

Dynamic Clock Adjustment technology

Kepler GPUs will feature a Dynamic Clock Adjustment technology and we can explain it easily without any complexity. Typically when your graphics card idles the card's clock frequency will go down... yes?

Well, obviously Kepler architecture cards will do this as well, yet now it works vice versa as well. If in a game the GPU has room left for some more, it will increase the clock frequency a little and add some extra performance. You could say that the graphics card is maximizing it's available power threshold.

Below some graphs based on the NVIDIA reference card, not today's tested product.

GeForce GTX 680Example of a stress test applied to the GPU, where the baseclock of 1006/1058 MHz goes much higher, climbing to even 1124 MHz.

Even more simple, DCA resembles Intels Turbo Boost technology a little bit by automatically increasing the graphics core frequency by 5 to 10 percent when the card works bellow its rated TDP. The baseclock of the GTX 680 in 3D mode is 1006 MHz, it can now boost towards 1058 MHz when the power envelope allows it to do so. The 'Boost Clock' however is directly related to the maximum board power, so it might clock even higher as longs as the GPU sticks within it's power target. We've seen the GPU run to an excess of even over 1100 MHz for brief periods of time.

Overclocking on that end will work the same as GPU boost will continue to work while overclocking, it stays restricted within the TDP bracket. We'll show you that in our overclocking chapter.


Share this content
Twitter Facebook Reddit WhatsApp Email Print