MSI GeForce RTX 4080 Suprim X review

Graphics cards 1049 Page 5 of 32 Published by


GPU Architecture

Digging deeper

The maximum per GPU shader cluster (Nvidia SM) for the Geforce RTX 4000 is now 144, which is the theoretical maximum. . As with Ampere, a cluster has 64 FP32 units and 64 FP32/INT32 units, four texture units, four tensor cores (Gen 4), a ray tracing core (Gen 3), and 128 KiB of L1 cache. This is how 18,432 FP32 shaders are assembled in one fully enabled ADA102 GPU. Half of which compute entirely is FP32 and the other half calculate in either FP32 or INT32. The configuration of the units relative to one another is identical to that of the Ampere; Nvidia has not altered this quantity. The raster operations pipeline of 16 units per raster engine also remains the same seen from Ampere. The Ada SM is equipped with 128 KB of Level 1 cache. Depending on the workload, this cache has a unified architecture that may be configured to operate as either an L1 data cache or shared memory. The complete AD102 GPU includes 18432 KB of L1 cache memory (compared to 10752 KB in GA102). Ada's Level 2 cache has been substantially redesigned relative to Ampere. AD102 is equipped with 98304 KB of L2 cache, a 16-fold increase over GA102's 6144 KB of L2 cache. All programs will benefit from the availability of such a vast cache memory pool, but sophisticated procedures such as ray tracing (especially path tracing) will gain the most.

A full AD103 GPU includes:

  • 9728 CUDA Cores
  • 76 RT Cores
  • 304 Tensor Cores
  • 304 Texture Units
  • 112 ROPs


Geforce RTX 4000 block diagram by Ada Lovelace

Based on that alone the GeForce RTX 4080 is substantially quicker than the RTX 3080 Ti.  The RTX 4080 16GB has 9,728 shaders, and the RTX 4080 12GB has 7,680 shaders, but all announced variants have clock rates between 2.5 and 2.6 GHz boost.

NVIDIA GeForce RTX 4090

The new flagship GPU is the AD102-300, with 16384 CUDA cores and a boost clock of up to 2520 MHz and 23-power phases. This translates to a single-precision performance of 82.6 TFLOPS, 2.3x higher than its predecessor, the RTX 3090. The flagship Ada-based SKU will include 24GB of GDDR6X memory, with a peak bandwidth of 1 TB/s. This new card will require at least 100W more power than the 3090 Ti. NVIDIA confirms that this model will be available on October 12 for $1599.

NVIDIA GeForce RTX 4080 

The RTX 4080 16GB will have an AD103 GPU with 9728 CUDA cores, 16GB of GDDR6X memory clocked at 22.4 Gbps, and a 320W TDP. This model will be available in November for at least $1199. 


The NVIDIA Applied Deep Learning Research team has spent the past four years developing a frame generation technique that blends optical flow estimates with DLSS to enhance the gaming experience. The insertion of synthesized frames between existing frames enhances the frame rate and delivers a more fluid gaming experience. Optical flow estimation is frequently used in computer vision applications to measure the direction and amplitude of pixels' apparent motion between successively generated graphics frames or video frames. In the realms of 3D graphics and video, typical use cases have included minimizing latency in augmented and virtual reality, enhancing the smoothness of video playback, improving video compression efficiency, and stabilizing video cameras. Typical applications of deep learning include automobile and robotic navigation, video analysis and comprehension. Optical flow is comparable to the motion estimation component of video encoding, but its requirements for precision and consistency are significantly more demanding. As a result, many algorithms are employed. Since the Ampere GPU architecture, NVIDIA's GPUs have supported an optical flow engine (OFA) that employs cutting-edge algorithms to produce high-quality outputs. Ada's OFA unit delivers 300 TeraOPS (TOPS) of optical flow work (over 2x quicker than the Ampere generation OFA) and supplies essential data to the DLSS 3 network. The Ada OFA unit and new motion vector analysis algorithms are essential components that enable accurate and efficient frame production inside the new DLSS 3 technology architecture. This new DL-based frame generation algorithm increases frame rates by a factor of two in comparison to DLSS 2. When DLSS 3 is paired with the new RT Core and other Ada architecture improvements, Ada GPUs are up to four times quicker than their predecessors. DLSS 3 can also enhance performance when the CPU is the GPU's performance barrier. Microsoft Flight Simulator is a typical example of a CPU-limited game because of its physics and enormous draw distances. This reduces the performance advantages of conventional super-resolution systems. In this instance, though, DLSS 3's capacity to produce frames still delivers a performance boost of up to double.

Share this content
Twitter Facebook Reddit WhatsApp Email Print