Product showcase – Interior

Product Showcase - Interior

Typically (in older cases), you’d need to take out the motherboard to install a new cooler. The giant cut-out for your cooler’s backplate should make life easier. With the solution mentioned above, you can reach it from both sides without the unpleasant experience of removing your motherboard from the chassis.

There is a giant cut-out on the right side of the motherboard for managing most of the cables. There’s a smaller one above the m/b (for EPS, etc.). Then there is another at the bottom for passing through the PSU cables from the unit. At the top, you can install up to 2x120/140 mm fans or the 240 mm radiator, but the compatibility is minimal.

There’s up to 14.5 cm for the combination of the fan and the radiator at the front.

At the front, you can see a place for three 120 mm fans (or two 140 mm ones), or you can install an LCS there, provided that it’s nothing more extensive than a 360 mm rad.  

There are seven expansion slots. 

A 120 mm fan can be installed at the back; it’s possible to choose the height of securing it