A Closer Look at the Spitfire MKII DAC
A Closer Look at the Spitfire MKII DAC
Let�s have a closer look at the Spitfire MKII Multiple Input DAC and check out this units build quality:
Front View
With the Spitfire MKII again everything is simple and easy to figure out. We have main power switch, power indicator, Signal Lock, Signal Play, USB usage. The design is similar with the Hex fasteners, case design and materials. Based on what we have seen, these units are built really tough offering aluminum cases.
Rear View
The rear of the unit is well laid out and simple to connect to your new or existing audio system. We have stereo line level outputs (L & R), coaxial/optical S/Pdif inputs, USB input and 24VDC power connector. The Hex fasteners are on the back also to allow access to the circuitry if required.
Specifications
- Amplifier Structure: Low Pass Filter with 2Vrms output
- Power Structure: Virtual- Ground Power Supply
- Support Format (Coax/optical): 24-bit/96khz (Max)
- Support Format (USB): 16-bit/48Khz (Max)
- Circuit Protect: Output short/Over current Protect
- Receiver Chip: TI-DIR9001
- DAC Chip: TI-PCM 1793
- USB Chip:TI-2704
- LPF Opamp: NS-LM4562NA
Audio Performance (1Khz Sine Wave, 2Vrms output, 24/48 KHz)
Coaxial Input
-
Frequency Response (From 40Hz to 15 KHz): 40Hz +0.01dB, 15 kHz � 0.05dB
-
Noise Level (1 KHz, A-Weighted): -112.1 dB
-
Dynamic Range (1 kHz, A-Weighted):112.1dB
-
THD%:0.0040%
-
Stereo Crosstalk:-109.8dB
Audio Performance (1 kHz sine wave, 2Vrms output, 16-bit /48 kHz)
USB Input
-
Frequency Response (From 40Hz to 15 kHz):40Hz +0.01dB, 15 KHz -0.12dB
-
Noise Level (1 kHz, A-Weighted): -96.1dB
-
Dynamic Range (1 kHz, A-Weighted):96.1dB
-
THD%:0.0040%
-
Stereo Crosstalk:-96.0dB
Connectivity
- Digital Input: 1 X Coax Jack
-
1 X Optical Jack 1 X USB Jack
- Line Output: 1 X RCA Jack
System Requirements:
- Use in any digital equipment with coaxial /optical output function, max supported format 24-bit/96Khz