Crucial P1 M.2 1000GB SSD Review

Memory (DDR4/DDR5) and Storage (SSD/NVMe) 357 Page 4 of 21 Published by


Product Showcase

Product Showcase

The following images were taken at high-resolution and then cropped and scaled down. The camera used was a Canon DSLR shooting 24 MegaPixel photos. Right then, off we go.


Performance is listed as 2000 MB/s for reads and 1700  MB/sec for writes with roughly 240K IOPS at 4k random writes QD32 aligned disk access with our tested model (the numbers differ a bit per alternating volume size - smaller is slower).



Above, the tested unit; you should easily be able to place the M.2 unit into a compatible motherboard. This stick needs PCIe 3.0 x4 / NVMe 1.3. You should, however, check out with the motherboard manufacturer if you have proper lane PCIe version with NVMe support.




While we'll look at components on the next page, we can already reveal .. the backside shows SMT traces for an additional NAND and  DRAM cache chips (likely there for the bigger 2TB version), only the front side is equipped with components and NAND chips. 



Share this content
Twitter Facebook Reddit WhatsApp Email Print