MSI GeForce GTX 980 Ti Lightning Photos Surface

Published by

Click here to post a comment for MSI GeForce GTX 980 Ti Lightning Photos Surface on our message forum
https://forums.guru3d.com/data/avatars/m/134/134194.jpg
looking forward to your review HH the 980ti's are awesome GPU's will be interesting to see what the lightning will bring to the table.
https://forums.guru3d.com/data/avatars/m/260/260103.jpg
It's gonna be a complete beast.
https://forums.guru3d.com/data/avatars/m/248/248721.jpg
Looking forward to review, but... But doubt it can OC on air much higher than G1 or AMP! Extreme. Beast like this is ment to be run under the water loop and that's the only way to find it's limits and benefirs of custom PCB, 15 phase VRM... let alone extreme OC with LN2 which is not available for most of the mortals out there. HH, I know I'm probably asking too much atm but is there a chance to consider testing beasts like this under the custom water loop + adequare WC block or at least under big enough AIO (+ few fans around mem chips and VRM's) and to update review few days/weeks after initial review comes out? From my personal experience I know how time consuming it can be (20+ years of OC experience on my back), it'll probably require to hire one more person to do that but many of us old geeks here would like something (new) like that in G3D reviews. Not asking to do that for every single card out there, just for custom made beasts like this. Maybe to contact EK.... Can you please consider about this is near future, it'll bring G3D reviews to the higher level for sure, don't want to read about extreme OC reviews on other G3D competitive sites, we want/need this on G3D! Please, please, please... 🙂
data/avatar/default/avatar23.webp
wonder if msi cherry-pick chip this time last 780lighting is not cherrypicked also compared to 980, they ditch "powerline-regulator" thinggie and seems also ditch back load-led this will vary between people, some will prefer this way to get pure-slick gpu some might prefer they got led, make it pretty bling-bling show on their case that 6+ 2x8pin power connector is crazy though wonder if someone dare OC that high on air (that stock lighting cooler)
https://forums.guru3d.com/data/avatars/m/263/263435.jpg
This card is going to be get high gpu temps, mark my words, and its getting loud i beth.
data/avatar/default/avatar07.webp
From the looks of it they didn't Factory OC the mem, for an 'enthusiast' card why the hell not?
https://forums.guru3d.com/data/avatars/m/147/147322.jpg
Did you need to occupy all power connectors? 😀 seems crazy...
https://forums.guru3d.com/data/avatars/m/154/154498.jpg
The countdown has begun! I have been waiting for this review HH - it can't come soon enough 😀
data/avatar/default/avatar08.webp
Hardly has any gains and can make the core clock unstable.
So why Zotac AMP! Extreme and ASUS Strix OC the mem if it makes no difference?
https://forums.guru3d.com/data/avatars/m/186/186763.jpg
Whens the review going up?
https://forums.guru3d.com/data/avatars/m/116/116345.jpg
This power is all for nothing if the silicon doesn't do anymore.
Hardly has any gains and can make the core clock unstable.
How the hell can a mem oc make the core clock unstable.
https://forums.guru3d.com/data/avatars/m/231/231931.jpg
From the looks of it they didn't Factory OC the mem, for an 'enthusiast' card why the hell not?
Nvidia limits the memory overclock from board partners, dont think you can go over ~7100
data/avatar/default/avatar07.webp
Nvidia limits the memory overclock from board partners, dont think you can go over ~7100
AMP! Extreme 7220
if they make sure that the core is stable at low voltage they can add that mem oc, but if you get close to the voltage limit and want as much core oc you should reduce mem.....
AMP! Extreme Core 1253 Boost 1355, so with a 7220 mem OC they must be the only AIB that can get it right as Nvidia don't (or didn't) allow AIBs to OC GDDR5 memory.
https://forums.guru3d.com/data/avatars/m/116/116345.jpg
It takes voltage from the core ?
Not sure if you're pulling information outta your ass or not?
https://forums.guru3d.com/data/avatars/m/237/237771.jpg
Not sure if you're pulling information outta your ass or not?
I think he is misunderstanding the power target. It uses more of your power target taking away core clock overhead. All that can be fixed with a BIOS mod.