GeForce 385.28 WHQL driver download

Videocards - NVIDIA GeForce Windows 10 | 11 672 Updated by Hilbert Hagedoorn

Click here to post a comment for GeForce 385.28 WHQL driver download on our message forum
#5463080
https://forums.guru3d.com/data/avatars/m/171/171974.jpg
Anyone else having a problem with DSR working? I can't get it to work. I've uninstalled and reinstalled(with DDU) and I still can't set my res any higher than 1080... Hmmm, I just checked my desktop res options and it shows the DSR ones. Soo, I can set my desktop to a higher res but in game I cannot.
I have been unable to get dsr to work with Hellblade. I can enable 4k, the game tells me it's set to 4k, I can see that it's set to 4k in the config, but it just won't display at 4k. Will test out later tonight to see if this set is the same? **edit** Nope, dsr still not working for Hellblade. Once again the game says the res is 4k, and the config says it's 4k, but no way am I pulling an avg of 150 fps at 4k.
#5463091
data/avatar/default/avatar39.webp
Anyone else getting a laggy mess with the witcher 3 with these drivers. I'm not sure it's the driver or game because I haven't played it in a wile. I was on the 382.xx drivers before.
#5463107
https://forums.guru3d.com/data/avatars/m/238/238599.jpg
Anyone else getting a laggy mess with the witcher 3 with these drivers. I'm not sure it's the driver or game because I haven't played it in a wile. I was on the 382.xx drivers before.
Everything works accordingly. 🙂
#5463118
https://forums.guru3d.com/data/avatars/m/82/82102.jpg
Anyone else getting a laggy mess with the witcher 3 with these drivers. I'm not sure it's the driver or game because I haven't played it in a wile. I was on the 382.xx drivers before.
The Witcher 3 is perfectly smooth for me with this driver. Didn't have problems with previous v385.12 either.
#5463171
data/avatar/default/avatar01.webp
Does this driver keep the Titan Xp prosumer performance upgrades from 385.12?
#5463180
https://forums.guru3d.com/data/avatars/m/238/238599.jpg
Does this driver keep the Titan Xp prosumer performance upgrades from 385.12?
Of course. Why not?
#5463195
https://forums.guru3d.com/data/avatars/m/174/174022.jpg
The good news is that in FF56b2 there is no black screens anymore but just momentary flicker. The bad news is that this is still caused by the nvlddmkm driver hang and recovery.
#5463206
https://forums.guru3d.com/data/avatars/m/93/93080.jpg
Well hell that worked(Def weird)!!! Thanks for the info. 🙂
Hey, no problem. Glad it worked for you too. 🙂 As the past set gave me issues with the NVCP not loading, I thought the driver was completely broken. But rest assured just glitches with new code. Hey it happens. On this end it seems to be mostly ironed out with this set. Strange how it just showed up for you but fixed for me. That's how it goes with PC's at times.
#5463208
https://forums.guru3d.com/data/avatars/m/263/263435.jpg
There is something wrong on my end software wise or this new driver is faulty ? When i try to instal these its fails halfway it wont instal anything from this driver version. Nevermind now it does what the actual **** :stewpid:
#5463209
https://forums.guru3d.com/data/avatars/m/93/93080.jpg
There is something wrong on my end software wise or this new driver is faulty ? When i try to instal these its fails halfway it wont instal anything from this driver version.
I don't think it's you. Past few sets have been glitchy. Try DDU then installing. IF not you could try extracting and installing manually through device manager.
#5463238
https://forums.guru3d.com/data/avatars/m/242/242471.jpg
Same here with a couple driver versions so it seems to be a game issue with some systems. DSR resolutions show up in selection, but hitting apply changes nothing in reality, it's still native res. W10 x64 latest official build.
I did a clean install (385.12 to 385.28) and DSR disappeared too, reinstalling the driver or apparently reboot fixes it. Quick check is to go to Windows resolutions and see if DSR shows up there
#5463307
https://forums.guru3d.com/data/avatars/m/270/270555.jpg
in bf1 the game still sttuters in dx 12 on operations cutscenes. But in gameplay is smooth some stutters at the beggining of the match but i think thats maybe because i have an old ssd. Im not playing bf4 anymore since i upgraded from my old 980 so i not tested it, and i dont have or interested in pub. In dota 2 vulkan mode there is no more sttutering using 8K DSR is smooth as hell. But was like that since 384.94, so at least for me these last drivers are keeping up a good job.
Is performance better or on par now with dx11 for bf1 under dx12. There is no new info out there on this.
#5463319
https://forums.guru3d.com/data/avatars/m/74/74345.jpg
Been busy with a replay of Witcher 3 lately, I did some sessions of 3+ hours on 382.53 without issues. Installed these and had 3 WHEA uncorrectable error BSOD's in 2 and half hours. Went back to 382.53 and everything ok again.
#5463320
https://forums.guru3d.com/data/avatars/m/174/174022.jpg
Is performance better or on par now with dx11 for bf1 under dx12. There is no new info out there on this.
Have the developer made any statements that they've improved it on NV's cards? If no then why would it be better? It's up to the devs to fix these things in DX12 and Vulkan.
#5463344
https://forums.guru3d.com/data/avatars/m/270/270555.jpg
Have the developer made any statements that they've improved it on NV's cards? If no then why would it be better? It's up to the devs to fix these things in DX12 and Vulkan.
If they have, it would have been in stealth. I realize dx12 implementation is up to the devs.
#5463345
https://forums.guru3d.com/data/avatars/m/240/240538.jpg
DSR works but Hellblade seems to have issues with it. You can select a DSR res. but resolution doesn't change in reality.
For all of you having issues with getting DSR to work, you will need to use the games internal downsampler. Go to: C:\Users\~~~~\AppData\Local\HellbladeGame\Saved\Config\WindowsNoEditor In the engine.ini file paste the following.... 200% is equivalent to 4k.
[SystemSettings] r.SceneColorFringeQuality=0 r.Tonemapper.GrainQuantization=0 r.Tonemapper.Quality=0 r.MotionBlurQuality=0 r.ScreenPercentage=200
#5463393
data/avatar/default/avatar19.webp
Been busy with a replay of Witcher 3 lately, I did some sessions of 3+ hours on 382.53 without issues. Installed these and had 3 WHEA uncorrectable error BSOD's in 2 and half hours. Went back to 382.53 and everything ok again.
I had the WHEA uncorrectable errors with the 384.xx drivers, turning off turbo in BIOS fixed it. I was told the 4790K's have an issue with turbo mode caused by to low CPU voltage. You could try to up your CPU voltage and see if it stabilizes. I don't have a good enough CPU cooler to attempt it. Google it, that is where I found this out. Thanks to all that replied to my TW3 question. Now I will start looking for a cure.
#5463401
data/avatar/default/avatar10.webp
No issues on windows 7 here......anyone still on windows 7? lol
#5463417
data/avatar/default/avatar31.webp
No issues on windows 7 here......anyone still on windows 7? lol
Yep, no issues here as well. 🙂
#5463436
https://forums.guru3d.com/data/avatars/m/269/269260.jpg
DSR works but Hellblade seems to have issues with it. You can select a DSR res. but resolution doesn't change in reality.
You can fix that selecting the dsr resolution in desktop and then opening the game using dsr already, now thw game can be played at desired dsr resolution.

Previous Page

Next Page