Download: Futuremark Outs 3DMark v2.3.3682

Published by

Click here to post a comment for Download: Futuremark Outs 3DMark v2.3.3682 on our message forum
#5416836
https://forums.guru3d.com/data/avatars/m/198/198862.jpg
I didnt get crashes on dx12 at all and i did benched quite a few times. Anyway, thanks HH.
#5416837
https://forums.guru3d.com/data/avatars/m/145/145154.jpg
A small "fix" that could cause an API failure? Perhaps a small fix for the API failure was lost in translation? 🙂 That or 3DMark is mad and hell bent on breaking their benchmark.
#5416855
https://forums.guru3d.com/data/avatars/m/169/169351.jpg
Can confirm, this update has fixed the API overhead test from crashing (my system had the bug).
#5416889
https://forums.guru3d.com/data/avatars/m/154/154498.jpg
Another 3.7GB download for a "small fix". They need to release a patch for this type of update, it is quite annoying to download over 7GB in the last two weeks.
#5416890
https://forums.guru3d.com/data/avatars/m/198/198862.jpg
Another 3.7GB download for a "small fix". They need to release a patch for this type of update, it is quite annoying to download over 7GB in the last two weeks.
It takes 15min to download 4gb with 40mbps net that cost 20€ a month. Idk whats the big deal.
#5416893
https://forums.guru3d.com/data/avatars/m/169/169351.jpg
Another 3.7GB download for a "small fix". They need to release a patch for this type of update, it is quite annoying to download over 7GB in the last two weeks.
It was just a 5MB update for me :/
It takes 15min to download 4gb with 40mbps net that cost 20€ a month. Idk whats the big deal.
Not everyone has access to a fast connection geographically speaking - I can only get ADSL and it's a sh*t connection, takes me over an hour to download 1GB for example. https://puu.sh/vbagL/28bd09cbf7.png
#5416898
https://forums.guru3d.com/data/avatars/m/189/189438.jpg
It was just a 5MB update for me :/ Not everyone has access to a fast connection geographically speaking - I can only get ADSL and it's a sh*t connection, takes me over an hour to download 1GB for example. https://puu.sh/vbagL/28bd09cbf7.png
Even Sky`s lowest broadband is more than that, either youve been seriously capped or you have a line issue.
#5416938
https://forums.guru3d.com/data/avatars/m/169/169351.jpg
Even Sky`s lowest broadband is more than that, either youve been seriously capped or you have a line issue.
It's the distance to the exchange and it's crap. No cable or fibre on our road yet either.
#5416946
https://forums.guru3d.com/data/avatars/m/262/262197.jpg
2 mbit/s means around 4.5 km distance from the exchange. it's typical for rural and not well expanded areas. some people even need to do DSL via satellite because there is no direct line to their ISP. that may increase speeds to ~10-16mbit/s but it also means RTT of 200-300ms
#5416959
https://forums.guru3d.com/data/avatars/m/201/201426.jpg
API test always crashes on me after first DX11 test. Wonder if it will run now. Ive tried stock cpu clocks and still same issue.
#5416963
https://forums.guru3d.com/data/avatars/m/169/169351.jpg
2 mbit/s means around 4.5 km distance from the exchange. it's typical for rural and not well expanded areas. some people even need to do DSL via satellite because there is no direct line to their ISP. that may increase speeds to ~10-16mbit/s but it also means RTT of 200-300ms
Yup, that's exactly it, exchange is 4 miles away but it's also because of the lines being over subscribed, we did have 3.7mbps up until a few months ago, but we've had a few more neighbours moving in recently each subscribing to broadband, it's no coincidence that our net speed has dropped since their arrival (our neighbours that have been here before the new arrivals have also noted a drop in speed).
#5417253
data/avatar/default/avatar22.webp
DX12 hang bug fixed for me.
#5417324
https://forums.guru3d.com/data/avatars/m/154/154498.jpg
It was just a 5MB update for me :/
Did you update from within the 3DMark application? The last few times I tried that the update failed and corrupted the installation. I would prefer to download a patch and run it when 3DMark is not open.
Not everyone has access to a fast connection geographically speaking - I can only get ADSL and it's a sh*t connection, takes me over an hour to download 1GB for example. https://puu.sh/vbagL/28bd09cbf7.png
This is true, I pay $100 per month for ADSL2 with 1TB download limit. I have 12Mbps (Megabits not Megabytes!) downstream (when there is no network congestion) so it takes me a while to download.
#5417390
data/avatar/default/avatar14.webp
For me the update was very small too. Updated within Steam
#5417439
https://forums.guru3d.com/data/avatars/m/169/169351.jpg
Did you update from within the 3DMark application? The last few times I tried that the update failed and corrupted the installation. I would prefer to download a patch and run it when 3DMark is not open. This is true, I pay $100 per month for ADSL2 with 1TB download limit. I have 12Mbps (Megabits not Megabytes!) downstream (when there is no network congestion) so it takes me a while to download.
I've got it through Steam
#5417458
https://forums.guru3d.com/data/avatars/m/154/154498.jpg
I've got it through Steam
I see! Well that explains the small patches 🙂
#5417529
https://forums.guru3d.com/data/avatars/m/104/104860.jpg
Did you update from within the 3DMark application? The last few times I tried that the update failed and corrupted the installation. I would prefer to download a patch and run it when 3DMark is not open.
Same for me, the update from 3DMark has never worked for me - it just exits without downloading anything. Probably because the install is not on the default system drive? Stupid! Every time downloading Gigs for a small update...