Download: AMD Radeon Software Crimson ReLive Edition 17.8.2 Drivers

Published by

Click here to post a comment for Download: AMD Radeon Software Crimson ReLive Edition 17.8.2 Drivers on our message forum
https://forums.guru3d.com/data/avatars/m/220/220734.jpg
Thanks for the post! Very excited to see Destiny 2 Beta support. Can't wait to give that a try soon.
https://forums.guru3d.com/data/avatars/m/209/209146.jpg
Not too much of a difference against the atiapfxx.blb file of 17.8.1 but then again it's only been a short while since that driver was released. ๐Ÿ™‚ Overwatch, Watch_Dogs (1) and Dishonored 2 - Crossfire profile updates. F1 2017 - "Dxx" profile added.
https://forums.guru3d.com/data/avatars/m/238/238382.jpg
AMD currently. DRIVERS? YOU WANT DRIVER!? HERE HAVE DRIVERS! I hope they fix this. "Mouse stuttering may be observed on some Radeon RX graphics products when Radeon WattMan is open and running in the background or other third party GPU information polling apps are running in the background."
https://forums.guru3d.com/data/avatars/m/209/209146.jpg
Overnight? Guess when I downloaded these from AMD yesterday they already had the newer version then since I checked and it still shows August 24th for the download in it's name. Must have been some quick hotfix I suppose, though 17.8.2 in general feels a bit like that overall with some additional Vega fixes but a couple of games getting supported too. ๐Ÿ™‚ (Only a few days after 17.8.1 was released out of it's earlier Beta 6 version heh.) Still a few known issues for Vega though in those release notes, maybe a 17.8.3 will follow shortly? (Or just 17.9.1 though that Wattman and input lag issue sounds annoying so sooner rather than later would be preferred for having that dealt with though it might be Vega GPU's only from how it's worded.) EDIT: Well what do I know, but the sooner they can start wrapping up the known Vega issues and work out any performance deficiencies the better, PUBG is gaining popularity so having that supported is a good thing and Destiny 2's PC beta might be a bit of a big thing too depending on how long they'll have it running. (Though I think you have to pre-order to get access to it?)
data/avatar/default/avatar23.webp
PUBG is now supported, but my question it... They said improvements on vega cards, but this mean that the driver improve fps even on older, but still supported gpus, like hd 7750 etc?
https://forums.guru3d.com/data/avatars/m/238/238369.jpg
D1stRU3T0R:

PUBG is now supported, but my question it... They said improvements on vega cards, but this mean that the driver improve fps even on older, but still supported gpus, like hd 7750 etc?
Yes.
data/avatar/default/avatar16.webp
Or not. The anserw to that isn't simple.
https://forums.guru3d.com/data/avatars/m/136/136884.jpg
It seems they fixed the WattMan bug with voltages not sticking. It has some volt drop, about one or two steps, but not a problem.
data/avatar/default/avatar01.webp
Looks like VEGA has become the new low for frying pans.
https://forums.guru3d.com/data/avatars/m/264/264746.jpg
WattMan now works fine. Finally.
https://forums.guru3d.com/data/avatars/m/133/133611.jpg
ddu, installed drivers, crimson panel wont event start in system tray at boot, aside from that i cant even call the panel from the right click desktop, and just browsing something quick from Facebook reset my driver. Freesync on my cfg70 still strobes brightness with games and the windmill amd demo. sad day, im about to swap my rx for my gtx 780ti, if im only gonna work with 144hz, then whats the point of having my rx470?
https://forums.guru3d.com/data/avatars/m/229/229367.jpg
d0X:

It seems they fixed the WattMan bug with voltages not sticking. It has some volt drop, about one or two steps, but not a problem.
Rambo:

WattMan now works fine. Finally.
Yeah It seems like it. Applied 1150mv, it goes up-to 1.125~1.131volts. But it still forgetts and spikes the voltage above what is configured in Wattman and setting a voltage, closing wattman and launching something like Google Chrome with some 3D load running (fire strike demo) the voltage is forgotten allowing it to push more voltage than configured. It's like it reverts to auto-voltage. -- edit -- Left to Right: 17.8.2 August24, 17.7.2 July 27, 17.7.1 July 10 , 17.6.2 June 13 https://www.3dmark.com/compare/fs/13454143/fs/13228407/fs/13195382/fs/12882090
https://forums.guru3d.com/data/avatars/m/238/238369.jpg
xodius80:

im about to swap my rx for my gtx 780ti
Feel so bad for people when they say, ''YEA AMD YOU HAVE THAT BUG, I WISH I HAD BOUGHT NVIDIA GTX BLABLA I WILL CHANGE TO NVIDIA BYE BYE AMD'' I really feel so bad. Good luck with your 780 bug free. ๐Ÿ™„
https://forums.guru3d.com/data/avatars/m/119/119475.jpg
Weird, as with the previous driver I had to manually scan installed games for them to appear on the gaming tab. Now it only seems to list Steam games, unlike in the past.
https://forums.guru3d.com/data/avatars/m/264/264746.jpg
s0x:

Yeah It seems like it. Applied 1150mv, it goes up-to 1.125~1.131volts. But it still forgetts and spikes the voltage above what is configured in Wattman and setting a voltage, closing wattman and launching something like Google Chrome with some 3D load running (fire strike demo) the voltage is forgotten allowing it to push more voltage than configured. It's like it reverts to auto-voltage. -- edit -- Left to Right: 17.8.2 August24, 17.7.2 July 27, 17.7.1 July 10 , 17.6.2 June 13 https://www.3dmark.com/compare/fs/13454143/fs/13228407/fs/13195382/fs/12882090
Mhmm, you are right. It's not works so well. I tried to forced P7 to 1050mV but it seems that voltage is higher, 1081mV. Since I have not reached 1090mV, WattMann applied voltages well but I couldn't set lower because then voltages jump to 1080mV. Half succes for me 'cause I can't change voltage on 17.7.2 and 17.8.1. Yay :| I didn't notice voltages forgetting releated to various software.
https://forums.guru3d.com/data/avatars/m/270/270128.jpg
With 17.8.1 and 17.8.2 I lose at least 20-25 FPS on average in PUBG with my RX 570 compared to the pre-Vega drivers. Only thing they fix for me is MSI Afterburner. Staying on 17.6.2 for now.
https://forums.guru3d.com/data/avatars/m/264/264746.jpg
Gosh, WattMan still doesn't work. Still forgots voltages. Totally useless for me.
https://forums.guru3d.com/data/avatars/m/229/229367.jpg
Small update: I've set the voltages with OverdriveNTool and it seems to be sticking. After 1 hour of Dirt 4 voltage didn't went above the value configured. Still, Wattman is borked.
https://forums.guru3d.com/data/avatars/m/133/133611.jpg
LocoDiceGR:

Feel so bad for people when they say, ''YEA AMD YOU HAVE THAT BUG, I WISH I HAD BOUGHT NVIDIA GTX BLABLA I WILL CHANGE TO NVIDIA BYE BYE AMD'' I really feel so bad. Good luck with your 780 bug free. ๐Ÿ™„
do you have amd stocks? why so angry about, i have my old 780gtx that runs well, and for my work is way better on the mercury engine in premiere, i wanted to try freesync but amd does not deliver. dont be mad, maybe they come up with better drivers, but for me its a deal breaker