Corsair H90 review

Cooling 190 Page 1 of 1 Published by

Click here to post a comment for Corsair H90 review on our message forum
#4540138
data/avatar/default/avatar05.webp
Should have been tested against the H80. But going by H60 numbers and this, it looks like the improvement against the H80 is small and not worth a change, if anything it seems like a downgrade.
#4540144
https://forums.guru3d.com/data/avatars/m/59/59729.jpg
The H80 offers pretty good cooling for my I7. Never going higher than 45c on 100% load.
#4540381
https://forums.guru3d.com/data/avatars/m/233/233814.jpg
The H50 offers pretty good cooling for my I7. Never going higher than 45c on 100% load.
¿Even with Linkpack (Linx, IntelBurnTest) o Prime95? That's hard to believe. Note you have to look at core temps, not the CPU temp reported by the mobo.
#4540410
https://forums.guru3d.com/data/avatars/m/59/59729.jpg
¿Even with Linkpack (Linx, IntelBurnTest) o Prime95? That's hard to believe. Note you have to look at core temps, not the CPU temp reported by the mobo.
It seems I was wrong. Idles at around 27C, 100% load goes up to a max of 54C.
#4540416
https://forums.guru3d.com/data/avatars/m/80/80129.jpg
It seems I was wrong. Idles at around 27c, 100% load goes up to a max of 52c.
Are you like outside in the Arctic or something? Even with a direct die mount and a H100 the lowest temp I've ever seen is 55.6c and the idle was 35.9 -- that's with a 25c ambient temp. Edit: I'm also pretty confident that I own the worst 3770K ever made. I can't get under 1.32v @ 4.6 and have it stable. And even after I delidded and used noctua my lowest temp is like 78c, prior to delidding it was over 95 sometimes.
#4540426
https://forums.guru3d.com/data/avatars/m/59/59729.jpg
Are you like outside in the Arctic or something? Even with a direct die mount and a H100 the lowest temp I've ever seen is 55.6c and the idle was 35.9 -- that's with a 25c ambient temp. Edit: I'm also pretty confident that I own the worst 3770K ever made. I can't get under 1.32v @ 4.6 and have it stable. And even after I delidded and used noctua my lowest temp is like 78c, prior to delidding it was over 95 sometimes.
I do have a Haff 922 case with 7 fans running, 5 being case fans. MB temp is 22C.
#4540471
data/avatar/default/avatar18.webp
What about a case How does this fit, you know..., in a Case?
#4540480
https://forums.guru3d.com/data/avatars/m/217/217316.jpg
¿Even with Linkpack (Linx, IntelBurnTest) o Prime95? That's hard to believe. Note you have to look at core temps, not the CPU temp reported by the mobo.
It's literally impossible to believe that he would have an i7 3770k at 45C under full load with even custom water cooling and delidding. I don't even believe the 54C figure.
#4540505
https://forums.guru3d.com/data/avatars/m/217/217316.jpg
I am only running at 4.2GHZ, with 1.13V. http://i1282.photobucket.com/albums/a523/Devilcry4u/heat_zps2c3af179.jpg
In that picture, it looks to me like you've just started Prime95, on test 2, and your temperatures have already hit 57 as a maximum. Give us an idea of your ambient. I would think you'd need sub-15 to hit this temperature. You definitely do have an H50, right, not something else? You're sure?
#4540509
https://forums.guru3d.com/data/avatars/m/59/59729.jpg
In that picture, it looks to me like you've just started Prime95, on test 2, and your temperatures have already hit 57 as a maximum. Give us an idea of your ambient. I would think you'd need sub-15 to hit this temperature. You definitely do have an H50, right, not something else? You're sure?
Erm...I meant H80...sorry. I'll run Prime95 overnight and see what the temps hit, but it shouldn't be that much higher. CPU is also underclocked (Speedstep) to 1.6GHz when the CPU is idle, seems to work ok.
#4541014
https://forums.guru3d.com/data/avatars/m/173/173587.jpg
The Hydro Series H90 is Corsairs first 1400mm Liquid Cooling solution that should be able to dissipate some impressive heat from your processor. With cool looks and very silent operation we can see this product ending up in a lot of PC builds alright.
WOW, That's a big fan /s >.>
#4541024
https://forums.guru3d.com/data/avatars/m/16/16662.jpg
Administrator
WOW, That's a big fan /s >.>
Haha, yeah dude HUGE. Fixed 😉
#4541088
data/avatar/default/avatar07.webp
Can't even beat a Kraken X40? A rather moot product, the H90 is.
#4541184
https://forums.guru3d.com/data/avatars/m/242/242471.jpg
Can't even beat a Kraken X40? A rather moot product, the H90 is.
But its quieter compared to Kraken at extreme fan profile.. I think i'll be getting this H90 then, i was looking at ThermalTake Water 2.0 Pro, but this H90 looks more appealing. The only bad thing is you can't mount 2 fans, it doesnt include extended fan holder or does it?
#4541346
data/avatar/default/avatar27.webp
But its quieter compared to Kraken at extreme fan profile..
The X40 beat it with Silent profile in the 4600 MHz 1.3 Volts LOAD test.
#4541379
https://forums.guru3d.com/data/avatars/m/242/242471.jpg
by 1C, that's a lot 😉 Hilbert could you please review TT Water 2.0 Pro too or is this to old? I see it was released mid 2012.
#4541390
data/avatar/default/avatar38.webp
by 1C, that's a lot 😉
More than that on the baseline test, and losing 1C on the 1.2V test. With the fact that X40 can still be cranked more is exactly why I consider H90 a moot product.