Corsair AX860i PSU review

PSU - Power Supply Units 109 Page 1 of 1 Published by

Click here to post a comment for Corsair AX860i PSU review on our message forum
https://forums.guru3d.com/data/avatars/m/243/243536.jpg
Lovely review! :P Oh i'll take one, another 680, ..big ass cpu cooler and it's time to take over the world! or something like that 🙂 *But sure give us the games that demand such investments and we'll cough up. *Hopefully hitman is a hardware hog.
data/avatar/default/avatar15.webp
was waiting for this psu as the 1200i is overkill in my situation. i still have a question regarding noise: corsair states the fan will not spin up if load is below about 20% AND if temperatures are below a certain level. what i'm really interested is the point where the fan starts to spin. the test i'm looking for is to put the psu into a closed case with a single gpu, let the system idle or may be run under light load and wait if the fan starts to spin as temperatures rise. the big question here is, after what time the fan will start to spin if it starts at all! what load was measured during this test (AC/wall outlet or DC/psu readings doesn't matter)? best case would be the fan did not start at all as temperatures won't rise enough because of the psu's high efficiency. no stress test on cpu or gpu during this test. just idle or light load as ms-office or surfing the web. using just the cpu fan, gpu fan and if required a single case fan. multiple case fans might keep the psu ambient temps artificially low, thus shifting the point where the fan kicks in. hilbert, would it be possible to perform this test with the ax860i. pretty sure some more ppl would be interested in this. also is there any buzzing sound coming from the psu. have read some reports of such buzzing sound generated by the ax1200i over on the corsair forums. ps. all reviews come up with graphs and figures regarding efficiency, voltage stability ripple and this stuff. i guess many ppl don't care if ripple is 10mv or 20mv or voltage drops to 12.0V instead of 12.05V. also if efficiency is 2% more or less won't be an issue in real life. but if the psu is able to stop the fan completely under light load and the fan remains stopped keeping the system silent, guess that's something everybody will realize quickly.
https://forums.guru3d.com/data/avatars/m/239/239932.jpg
Merda .. $229? :P :O
https://forums.guru3d.com/data/avatars/m/224/224952.jpg
was waiting for this psu as the 1200i is overkill in my situation. i still have a question regarding noise: corsair states the fan will not spin up if load is below about 20% AND if temperatures are below a certain level. what i'm really interested is the point where the fan starts to spin. the test i'm looking for is to put the psu into a closed case with a single gpu, let the system idle or may be run under light load and wait if the fan starts to spin as temperatures rise. the big question here is, after what time the fan will start to spin if it starts at all! what load was measured during this test (AC/wall outlet or DC/psu readings doesn't matter)? best case would be the fan did not start at all as temperatures won't rise enough because of the psu's high efficiency. no stress test on cpu or gpu during this test. just idle or light load as ms-office or surfing the web. using just the cpu fan, gpu fan and if required a single case fan. multiple case fans might keep the psu ambient temps artificially low, thus shifting the point where the fan kicks in. hilbert, would it be possible to perform this test with the ax860i. pretty sure some more ppl would be interested in this.
Its going to be better than my AX750 because it is a bit more efficient, so produces even less heat and this PSU is damn good. My fan comes on very occasionally at idle (approx 130W), its spins very slow for a few moments and then stops. Even under heavy load, the fan is silent, so at idle you have no chance of hearing it.
https://forums.guru3d.com/data/avatars/m/219/219860.jpg
This amazing PSU even beats my Corshair Professional HX850 a little. If I had a lesser model instead of this HX850 I'd upgrade for sure.
data/avatar/default/avatar14.webp
Good PSU but price is not justified. There are numerous other options out there which are far less expensive. Are you guys counting pennies for electricity ? Only third world countries care about electric bills, and even there its not that big of a deal...
https://forums.guru3d.com/data/avatars/m/224/224952.jpg
Good PSU but price is not justified. There are numerous other options out there which are far less expensive. Are you guys counting pennies for electricity ? Only third world countries care about electric bills, and even there its not that big of a deal...
Thats very short minded. Do your sums, look at how long the PSU will last and consider how long it will be left on for per day. Oh wait, you didnt even consider that and you are knocking us? Also, reliability and aftercare are crucial for some.
https://forums.guru3d.com/data/avatars/m/239/239932.jpg
Are you guys counting pennies for electricity ? Only third world countries care about electric bills, and even there its not that big of a deal...
Watch out .. we have a bad@ss right here! :P
data/avatar/default/avatar31.webp
It just looks marginal performance gains for a lot of money. Most of you have decent PSUs. I don't get it. The guy above you has Corsair AX series, if he changes it for this new PSU, to me such a move is not justified at all.
https://forums.guru3d.com/data/avatars/m/224/224952.jpg
Show where anyone said it was a good idea to do that?