ASUS To Release ROG RYUJIN II 240 LCS, has 3.5 inch LCD mounted

Published by

Click here to post a comment for ASUS To Release ROG RYUJIN II 240 LCS, has 3.5 inch LCD mounted on our message forum
#5879690
https://forums.guru3d.com/data/avatars/m/282/282473.jpg
okay but is it 360hz hdr10 ?
#5879705
https://forums.guru3d.com/data/avatars/m/272/272918.jpg
i had the first 360 ryujin and i must say, the armoury crate software made it unbearable, so many problems all the way through. After a few months using it the oled screen had very bad burn in too, i wouldnt bother with it again. Shame as it looked good. Also the silver finish on the screen, i wiped it once and the silver mirror effect wiped off like some cheap paint. Ended up switching to a corsair aio and a rasp pi 5 inch screen to show temp monitoring which looks better anyway.
#5879861
https://forums.guru3d.com/data/avatars/m/34/34585.jpg
insp1re2600:

i had the first 360 ryujin and i must say, the armoury crate software made it unbearable, so many problems all the way through. After a few months using it the oled screen had very bad burn in too, i wouldnt bother with it again. Shame as it looked good. Also the silver finish on the screen, i wiped it once and the silver mirror effect wiped off like some cheap paint. Ended up switching to a corsair aio and a rasp pi 5 inch screen to show temp monitoring which looks better anyway.
Not had issues with mine and have had it about 2 years now, but then i noticed the silver would be a nightmare for finger prints so i make sure not to touch it so never had the need to clean it so far anyway. As i have the claymore Keyboard, Spatha mouse, Strix X570 motherboard and Strix RX2080 i kinda need to use the armory software which can be a little temperamental at times.
#5879877
https://forums.guru3d.com/data/avatars/m/272/272918.jpg
Dazz:

Not had issues with mine and have had it about 2 years now, but then i noticed the silver would be a nightmare for finger prints so i make sure not to touch it so never had the need to clean it so far anyway. As i have the claymore Keyboard, Spatha mouse, Strix X570 motherboard and Strix RX2080 i kinda need to use the armory software which can be a little temperamental at times.
No burn in? I threw it in the trash
#5879946
https://forums.guru3d.com/data/avatars/m/276/276552.jpg
Maybe these LCDs that ASUS adds sometime to computer components like this aio and power supplies look cool but in my view they are for many of us useless. Except if one has his tower sitting on the table where one can look inside the case when gaming. 🙄 Otherwise if one has big tower like mine Cooler Master Cosmos C700p you won't bend down the table to look what are temperatures every short while. I have custom watercooled setup and I do monitoring of water temperature, GPU, CPU temperatures, clocks and water flow rate but for that I use a small LCD that sits on my table. 😀 I use Aquacomputer Vision. https://shop.aquacomputer.de/product_info.php?products_id=3595
#5880130
https://forums.guru3d.com/data/avatars/m/242/242134.jpg
probably still asetek based, so, not interested. and even if newer ones are decent, i don't trust a pump that needs 6 or 7 gens to get "decent" regarding quality. @Turbogear all my cases in the past 5y are on the desk, including the level 20.. 😀
#5880150
data/avatar/default/avatar02.webp
They just need to release a white version... 😉
#5880347
data/avatar/default/avatar03.webp
Why NF-F12 fans? They're one of the worst radiator fans on the market.
#5880454
https://forums.guru3d.com/data/avatars/m/34/34585.jpg
vbetts:

But uh can we talk about how Lisa is livening up the stage with color and not a black leather jacket?
insp1re2600:

No burn in? I threw it in the trash
I just stared at the screen it seems i do have some minor burn in of the eye possible because i may have had that set for a year, i don't like the software so just normally leave it on default with a moving.
#5880485
https://forums.guru3d.com/data/avatars/m/272/272918.jpg
Dazz:

I just stared at the screen it seems i do have some minor burn in of the eye possible because i may have had that set for a year, i don't like the software so just normally leave it on default with a moving.
i had it on sensors alternating different ones, still got burn in, they actually RMA them due to the burn in, there was a firmware flash for it last year, maybe wait a little and rma, you may get the new type. ha
#5885830
https://forums.guru3d.com/data/avatars/m/34/34585.jpg
insp1re2600:

i had it on sensors alternating different ones, still got burn in, they actually RMA them due to the burn in, there was a firmware flash for it last year, maybe wait a little and rma, you may get the new type. ha
Good point it does have a 3 year warranty lol