TeamGroup MP32 M2 NVMe 480GB SSD Review - Product Showcase

by Hilbert Hagedoorn on: 10/12/2018 06:35 AM [

Product Showcase

The following images were taken at high-resolution and then cropped and scaled down. The camera used was a Canon DSLR shooting 24 MegaPixel photos. Right then, off we go.

The sample we have at hand is the 256 GB M.2 model. Performance is listed as 1,500 MB/s for reads and 800 MB/sec for writes with roughly 200 IOPS at 4k random writes QD32 aligned disk access with our tested model (the numbers differ a bit per alternating volume size).

Above, the tested unit; you should easily be able to place the M.2 unit into a compatible motherboard. This stick needs PCIe 3.0 x2 / NVMe 1.3. You should, however, check out with the motherboard manufacturer if you have proper lane PCIe version with NVMe support.

While we'll look at components on the next page, we can already reveal .. the backside does not show any SMT traces, only the front side is equipped with components and NAND chips.

22 pages « 3 4 5 6 next »

TeamGroup MP32 M2 NVMe 480GB SSD Review
We review the TeamGroup MP32 256GB M2 NVMe SSD. With this Phison 5008-E8 ontroller based product and Toshiba NAND, the company releases an affordable M2 NVMe SSD. The performance is wat faster than...

TeamGroup T-Force Delta RGB 250GB SSD review
TeamGroup recently announced their Delta RGB series SSDs. While offering value for money and armed with RGB bling, as we learned, these SSDs offer surprisingly good performance. The T-Force Delta RGB...

TeamGroup T-Force VULCAN TUF DDR4 3200 MHz review
We review T-Force VULCAN TUF DDR4 from TeamGroup, it is a dual-channel 3200 MHz kit with the ability to be tweaked a little. It's TUF, meaning the heat spreader has been aligned with ASUS TUF Sabe...

Teamgroup T-Force Night Hawk RGB DDR4 Memory Review
In this article we review the new T-Force RGB series Night Hawk DDR4 memory from Teamgroup. Not only do these puppies look awesome, they are properly specced as well. We received a 2x8GB DDR4 3000MHz ...