HP S750 SSD 1TB review

Memory (DDR4/DDR5) and Storage (SSD/NVMe) 368 Page 4 of 20 Published by

teaser

Product Showcase

Product Showcase

The following images were taken at high-resolution and then cropped and scaled-down. The camera used was a Canon DSLR shooting 12 MegaPixel photos. Right then, packaging. The sample we have at hand is the 1TB model. Performance is listed as 560 MB/s read and 520 MB/s writes with close to 75K IOPS at 4k random write QD32 aligned disk access with our tested model.  You should easily be able to place it somewhere in your chassis. Small and light-weight. The SSD supports TRIM making sure your SSD will regain its speed once in idle. The casing as based on aluminum for optimal cooling. Obviously you do need to connect it to a proper SATA 3 (6G) controller. Native chipsets ones from Intel and AMD themselves are always the fastest. Obviously the drives are backwards compatible towards SATA2 as well, but the bandwidth limitation there would be capped to roughly 270 MB/s (which is still silly fast compared to HDDs). A proper SATA 6G cable is recommended and should be delivered with your motherboard. We however never ever had issues with a standard SATA2 cable either. It seems that SATA3 cables are a little thicker, that's all.

  

Img_0829

Img_0830

Img_0831

Img_0832

Share this content
Twitter Facebook Reddit WhatsApp Email Print