GeForce GTX 1050 3GB review - Hardware Setup | Power Consumption

Hardware Installation

Installation of any of the Nvidia GeForce cards is really easy. Once the card is seated into the PC make sure you hook up the monitor and of course any external power connectors like 6 and/or 8-pin PEG power connectors. Preferably get yourself a power supply that has these PCIe PEG connectors natively as converting them from a Molex Peripheral connector in this year and age is a no-go. Purchase a proper power supply, ok?

  The 3GB GTX 1050 does not require any external power cables

• Download new NVIDIA GeForce drivers here

Once done, we boot into Windows, install the latest drivers and after a reboot, all should be working. No further configuration is required or needed unless you like to tweak the settings, for which you can open the NVIDIA control panel.

Power Consumption

Let's have a look at how much power draw we measure with this graphics card installed. The methodology: We have a device constantly monitoring the power draw from the PC. We stress the GPU to the max, and the processor as little as possible. The before and after wattage will tell us roughly how much power a graphics card is consuming under load. Our test system is based on an eight-core Intel Core i7-5960X Extreme Edition setup on the X99 chipset platform. This setup is overclocked to 4.20 GHz on all cores. Next, to that, we have energy saving functions disabled for this motherboard and processor (to ensure consistent benchmark results). We'll be calculating the GPU power consumption here, not the total PC power consumption.
 

Power consumption	TDP in KWh	KWh price	2 hrs day	4 hrs day
Graphics card measured TDP	0,073	0,20	0,03	0,06
Cost 5 days per week / 4 hrs day	€ 0,29
Cost per Month	€ 1,27
Cost per Year 5 days week / 4 hrs day / €	€ 15,18
Cost per Year 5 days week / 4 hrs day / $	$ 17,77

 
Here is Guru3D's power supply recommendation:

• GeForce GTX 1050 and 1050 Ti - On your average system the card requires you to have a 300~350 Watts power supply unit.

If you are going to overclock your GPU or processor, then we do recommend you purchase something with some more stamina. And remember, a PSU is the most efficient at 50% load. So if you use 400 Watts on average (SLI), the most energy friendly power supply would be an 800 Watt model. There are many good PSUs out there, please do have a look at our many PSU reviews as we have loads of recommended PSUs for you to check out in there. What could happen if your PSU can't cope with the load is:

• Bad 3D performance
• Crashing games
• Spontaneous reset or imminent shutdown of the PC
• Freezing during gameplay
• PSU overload can cause it to break down

Let's move to the next page where we'll look into GPU heat levels and noise levels coming from this graphics card.