As most of you know, with most videocards you can apply a simple series of tricks to boost the overall performance a little. You can do this at two levels, namely tweaking by enabling registry or BIOS hacks, or very simply to tamper with Image Quality. And then there is overclocking, which will give you the best possible results by far.
What do we need? One of the best tools for overclocking NVIDIA and ATI videocards is our own AfterBurner which will work with 90% of the graphics cards out there. We can really recommend it, download here.
Where should we go? Overclocking: By increasing the frequency of the videocard's memory and GPU, we can make the videocard increase its calculation clock cycles per second. It sounds hard, but it really can be done in less than a few minutes. I always tend to recommend to novice users and beginners, to not increase the frequency any higher than 5% on the core and memory clock. Example: If your card runs at 600 MHz (which is pretty common these days) then I suggest that you don't increase the frequency any higher than 30 to 50 MHz.
More advanced users push the frequency often way higher. Usually when your 3D graphics start to show artifacts such as white dots ("snow"), you should back down 10-15 MHz and leave it at that. Usually when you are overclocking too hard, it'll start to show artifacts, empty polygons or it will even freeze. Carefully find that limit and then back down at least 20 MHz from the moment you notice an artifact. Look carefully and observe well. I really wouldn't know why you need to overclock today's tested card anyway, but we'll still show it.
All in all... do it at your own risk.
Core Clock: 830MHz
Core Clock: 880MHz
Core Clock: 955MHz
Shader Clock: 830MHz
Shader Clock: 955MHz
Memory Clock: 5000MHz
Memory Clock: 5600 MHz
Now we had a bit of an issue with 3rd party overclocking, so we opted to use the internal OverDrive function in the AMD drivers. AMD gives a lot of tweakability in terms of MHz versus sliders.
Now there is a little room left for overclocking, but you need to wonder ... why you should do it. The card already runs pretty hot and noisy -- the performance however is already beastly. You can imagine that overclocking won't help you out a lot at this perf level.
Regardless of that, with Overdrive make sure you do the following:
Enable AMD Overdrive
Increase power control settings to +20%
Adjust FAN RPM as required
Find your preferable overclock
MAKE SURE you do the above with each of the two GPUs. See the blue colored pull down in the screenshot, you need to apply the settings for each GPU.
We left the fan RPM control at default in all circumstances. We reached a very decent overclock showing a decent increase in overall performance. Voltage tweaking is not yet option. Our stable end result was 955 MHz on the core and 5600 MHz on the memory. Here as well the temps did not change very much, DBa levels remain roughly similar but noisy. For overclocking, as stated, we set PowerTune to it's maximum +20 value.
Above we have Battlefield Bad Company 2, maxed out image quality settings as before with 8xAA 16xAF
Above we have Metro, maxed out image quality settings as before with AAA mode and 16xAF.
Above we can see 3DMark 11 - the Performance mode is applied here. Alright, enough benchmarks we say, let's head onwards to the conclusion.
PowerColor Radeon HD 7850 SCS3 review We test and review the PowerColor Radeon HD 7850 SCS3 today. This stock clocked Radeon HD 7850 is cooled passively, meaning it has no fans tool it down. That also means it's rather silent as it does not make any noise. But what about temperatures then you must be wondering ?
Gigabyte Radeon HD 7790 2GB OC review We test and review the Gigabyte Radeon HD 7790 2GB OC edition, also known under SKU code GV-R7790OC-2GD. We benchmark the product incl FCAT Frametimes. The new graphics card is intended to boost a little more performance into entry-level gaming. The Gigabyte HD7790 OC 2GB clocks in at 1075 MHz on the boost engine, packed with totally silent custom cooling.
MSI Radeon HD 7790 TurboDuo OC review We test and review the MSI Radeon HD 7790 OC edition, also known under SKU code R7790-1GD5-OC incl FCAT Frametimes. The new graphics card is intended to boost a little more performance into entry-level gaming.
Radeon HD 7990 review We review the new AMD Radeon HD 7990 including FCAT frametime measurements. The dual GPU product that you guys learned to know under codename Malta finally is released. AMD it doing it in style, two fully equipped Tahiti XT2 GPUs versus good yet silent cooling. In this review we'll look at the product, the architecture, the benchmarks, including frametime based FCAT measurements. Head on over towards our AMD Radeon HD 7990.