EVGA GeForce GTX 650 Ti Boost SC edition review

Graphics cards 1047 Page 3 of 23 Published by

teaser

Product Showcase

Product Showcase

EVGA delivered us their GeForce GTX 650Ti Boost SC edition graphics card with 2048 MB GDDR5. Obviously all board partners will offer a wide variety of models/SKUs with customized PCB's, coolers and memory configurations. The card has a 1071 MHz base clock frequency, the effective memory data rate (192-bit) is 6008 MHz. Being GDDR5 that doubles up bandwidth giving this product a rather nice 144 GB/sec of bandwidth to fool around with. Our card has been equipped with 2 GB of GDDR5 memory. 

3002_img_8073

Here you can see the GeForce GTX 650 Ti Boost, the 2 GB version. Honestly aside from a few shader processors, you are looking at the GeForce GTX 660. Overall a nice yet simple looking card for what it is reality. Let's look at the card from several different viewpoints. This is the SC editon (Super Clocked). We noticed the boost freqeuency to even pass 1200 MHz.

Img_8074

The card is equipped with the GK106 GPU that harbours the Kepler GPU architecture. You will spot two dual-link DVI connectors, a HDMI connector and Display Port as well.

Img_8076

When we flip the card around we spot a 6-pin PEG power connector (BTW I get asked about it all the time but PEG = PCI Express Graphics). With 75W leading though the PCIe slot and another 75 watt fed by the plug you'll have 150W available for potential overclocking.

Img_8077

Looking at the backside of the card we see a very non-complex PCB. As you can see there are no other SMT traces to be found for extra memory, abundantly indicating that this indeed is a 2GB of graphics memory. Mind you that these cards come with one SLI connector allowing you to setup a 2-way SLI system. Price performance wise that could be a very attractive alternative really.

Img_8075

The cooler is okay, but makes a bit of a humming noise, the temperatures under gaming load at give or take 75 Degrees C. The card is PCIe gen 3.0 compatible. Going from PCIe Gen 2 to Gen 3 doubles the bandwidth available to the add-on cards installed, from 500 MB/s per lane to 1 GB/s per lane. 

Share this content
Twitter Facebook Reddit WhatsApp Email Print