PowerColor Radeon RX 480 RED DEVIL review

Graphics cards 1049 Page 1 of 1 Published by

Click here to post a comment for PowerColor Radeon RX 480 RED DEVIL review on our message forum
#5313252
https://forums.guru3d.com/data/avatars/m/16/16662.jpg
Administrator
You are awesome HH, tnx as usual. If I may ask just one more thing does the msi 480 AIB go over 1400Mhz with afterburner?.. Tnx
All AIB cards seem to halt at roughly 1360~1375 MHz, after that number they become more unstable. I did reach 1400 on the MSI card, but it just wasn't stable long term. AB is not going to change the overall result, other then the tweaking process is way more handy.
#5313256
data/avatar/default/avatar40.webp
All AIB cards seem to halt at roughly 1360~1375 MHz, after that number they become more unstable. I did reach 1400 on the MSI card, but it just wasn't stable long term. AB is not going to change the overall result, other then the tweaking process is way more handy.
Is that with stock voltages, I am just asking because a user over at OCUK managed to get his Nitro + 1400 mhz with stock voltages and 1450 i believe with voltage tweaks..
#5313257
data/avatar/default/avatar21.webp
I think for AMD fanboys it is clear that overclocking will always be a dream for AMD. Never ever hype about AMD OC or stupid BS hype of Wccf. Never post it here.
#5313259
https://forums.guru3d.com/data/avatars/m/16/16662.jpg
Administrator
Is that with stock voltages, I am just asking because a user over at OCUK managed to get his Nitro + 1400 mhz with stock voltages and 1450 i believe with voltage tweaks..
+100 mV on the GPU stock fan settings though. But it depends highly on ASIC quality ... have a peek here.
#5313261
data/avatar/default/avatar14.webp
+100 mV on the GPU stock fan settings though. But it depends highly on ASIC quality ... have a peek here.
Tnx again it clears it up.. I am getting the devil for my GF... HH as usual you are awesome 🙂
#5313265
https://forums.guru3d.com/data/avatars/m/164/164033.jpg
Tnx again it clears it up.. I am getting the devil for my GF... HH as usual you are awesome 🙂
1.3v might get those 1400+ but then again the amount of power the gpu would use. Uhhh. I ordered nitro+ for my partner 😀
#5313267
https://forums.guru3d.com/data/avatars/m/263/263841.jpg
Nice review Hilbert! Out of curiosity how does the devilish award stack up against the recommended award? 😀
#5313293
https://forums.guru3d.com/data/avatars/m/209/209146.jpg
http://www.guru3d.com/articles-pages/powercolor-radeon-rx-480-red-devil-review,10.html Going by those results then this third-party 480 would with the 16.7.3 drivers actually perform above a Fury? Not bad if the changelog is accurate with the performance gains in that game. 🙂 (EDIT: Well it generally never is I suppose, it's always "up to" I believe. 😛 ) http://forums.guru3d.com/showthread.php?t=409004
Performance Improvements: Rise of the Tomb Raider™ performance increase up to 10% versus Radeon Software Crimson Edition 16.7.2 on Radeon™ RX 480 graphics
A gain of ~6 FPS at 1080, 4 FPS at 1440 and 2 FPS at 2160 would make it possibly squeeze just between the Fury's performance levels. 🙂 (Granted it's only for a single game and it's taken AMD a while to optimize their drivers for said game but it's a nice first glimpse of what more mature drivers could potentially do for this GPU model.) (And what Vega might be capable off as a more high-end 14nm model...we'll see when it's actually available though. 😀 )
#5313303
https://forums.guru3d.com/data/avatars/m/252/252334.jpg
So... Does this card use a reference pcb with default power delivery as the reference cards ? Oh btw, I agree with you HH, that's a David's star definitely 😀
#5313340
https://forums.guru3d.com/data/avatars/m/165/165326.jpg
So... Does this card use a reference pcb with default power delivery as the reference cards ?
No it does not , it uses an 8 Pin power connector plus superior 6+1 multi-phases where each phase supplies 25W instead of 22.5W found in other boards. Source: http://www.powercolor.com/Global/News.asp?id=1251 @ Hilbert H. , nice review. Great job as always 🙂.
#5313365
https://forums.guru3d.com/data/avatars/m/262/262354.jpg
Nice to have Doom Vulkan!! Thx HH. I will grab a 480 AIB in september...replacing my 7950
#5313380
data/avatar/default/avatar27.webp
Thank you HH! 🙂
#5313402
https://forums.guru3d.com/data/avatars/m/262/262197.jpg
Hey Guru3D The review is very well made and very thorough. I however am a little worried about the use of DOOM? I am a little afraid that it in fact will cost you some clicks as this stuff, with its demonic themes, doesn't sit well with a lot of religious people. So I'd strongly suggest that you will keep this comment in mind for your next reviews.
why? occultism is a religion. you don't want to discriminate them, do you?
#5313414
data/avatar/default/avatar26.webp
In Doom, using Vulkan, you should have set Anti-aliasing to "TSAA8X" or "Off" in order to enable asynchronous compute, otherwise you get lower results than are possible with AMD cards. Very impressed with this card and the silent cooling.
#5313420
https://forums.guru3d.com/data/avatars/m/206/206288.jpg
Yeah, I noticed that. Makes it a pain for him though as all the OGL results are with SMAA.
#5313444
https://forums.guru3d.com/data/avatars/m/254/254338.jpg
Hey Guru3D The review is very well made and very thorough. I however am a little worried about the use of DOOM? I am a little afraid that it in fact will cost you some clicks as this stuff, with its demonic themes, doesn't sit well with a lot of religious people. So I'd strongly suggest that you will keep this comment in mind for your next reviews.
What a load of crap, I assume your just complaining because you don't like the results rather than any other reason. After all you don't seem to have any issue with the fact the card being reviewed is a RX 480 RED DEVIL edition!
#5313452
data/avatar/default/avatar39.webp
Hey Guru3D The review is very well made and very thorough. I however am a little worried about the use of DOOM? I am a little afraid that it in fact will cost you some clicks as this stuff, with its demonic themes, doesn't sit well with a lot of religious people. So I'd strongly suggest that you will keep this comment in mind for your next reviews.
If you're offended by DOOM then you don't belong here..
#5313490
https://forums.guru3d.com/data/avatars/m/52/52796.jpg
Hey Guru3D The review is very well made and very thorough. I however am a little worried about the use of DOOM? I am a little afraid that it in fact will cost you some clicks as this stuff, with its demonic themes, doesn't sit well with a lot of religious people. So I'd strongly suggest that you will keep this comment in mind for your next reviews.
http://i1.kym-cdn.com/photos/images/original/000/990/735/438.png
#5313736
data/avatar/default/avatar10.webp
Register just to ask this: Why didn't you use no AA or TSSAA in Doom w/ Vulkan. Thanks.

Previous Page

Next Page