MSI Outs Optix G242 24in Monitor 144Hz / 1ms

Published by

Click here to post a comment for MSI Outs Optix G242 24in Monitor 144Hz / 1ms on our message forum
https://forums.guru3d.com/data/avatars/m/250/250418.jpg
Yay, another 6bit monitor that doesn't offer anything innovating to the market.
https://forums.guru3d.com/data/avatars/m/280/280231.jpg
Silva:

Yay, another 6bit monitor that doesn't offer anything innovating to the market.
You do not need more than 6-bit colors when you aren't HDR capable. The end.
https://forums.guru3d.com/data/avatars/m/273/273678.jpg
itpro:

You do not need more than 6-bit colors when you aren't HDR capable. The end.
I disagree, colours are certainly more vivid on a true 8bit display.
https://forums.guru3d.com/data/avatars/m/198/198862.jpg
Astyanax:

I disagree, colours are certainly more vivid on a true 8bit display.
Or a 10bit. 🙂
https://forums.guru3d.com/data/avatars/m/273/273678.jpg
Undying:

Or a 10bit. 🙂
the hoops you have to jump through to identify which are 10bit and which are 8+FRC though.:(
https://forums.guru3d.com/data/avatars/m/280/280231.jpg
Astyanax:

I disagree, colours are certainly more vivid on a true 8bit display.
No visible difference in my monitor when changing between 6,8 and 10bit display output options in my radeon panel. 🙄
https://forums.guru3d.com/data/avatars/m/282/282473.jpg
Undying:

Or a 10bit. 🙂
pshhhh,whatever I already had 16-bit in 1995
https://forums.guru3d.com/data/avatars/m/250/250418.jpg
itpro:

You do not need more than 6-bit colors when you aren't HDR capable. The end.
If you have dark coloured eyes and are blessed with good eyesight, as is a big portion of the world population, you will not care. If you're like me with green/blue eyes and wear glasses, FRC will strain your vision and give you headache. Although both your eyes and colour calibration tools are fooled by this, the fatigue I experience while in front of these kind of monitors is real. I also think it's a marketing BS saying the monitor is 8bit on the spec sheet when it clearly isn't. Although it can display "accurate" 8bit range colours, it's done with FRC and it's not a true 8bit panel. This is done to make cheaper panels, but I'd prefer to pay more and not to go blind. https://upload.wikimedia.org/wikipedia/commons/thumb/9/95/Green_cyan_FRC_30_ms.gif/1920px-Green_cyan_FRC_30_ms.gif
itpro:

No visible difference in my monitor when changing between 6,8 and 10bit display output options in my radeon panel. 🙄
You either have an hardware/software issue, or you're blind. Even switching from FULL RGB to Limited RGB I see a massive difference. That said, if you're not educated on the differences you'll never spot them.