Here's the new 12-pin NVIDIA PCIe Power connector in more detail, much smaller then you think it is

Published by

Click here to post a comment for Here's the new 12-pin NVIDIA PCIe Power connector in more detail, much smaller then you think it is on our message forum
https://forums.guru3d.com/data/avatars/m/270/270041.jpg
It's tiny, and guess top end cards only need one. Will this become universal now? Will even low end cards use it I wonder. Though I can only see a benefit on the high end as technically it would take up less pcb space. My card has 3 8 pins and I could be done with just a single one of these which Is a nice thought.
https://forums.guru3d.com/data/avatars/m/248/248994.jpg
Ricepudding:

It's tiny, and guess top end cards only need one. Will this become universal now? Will even low end cards use it I wonder. Though I can only see a benefit on the high end as technically it would take up less pcb space. My card has 3 8 pins and I could be done with just a single one of these which Is a nice thought.
I'd welcome it as long as it's free of license costs for everybody. It would be more stylish than the current 6+2 frankenconnectors. A single cable serving even a beefier video card would be an even greater plus. Luckily it turned out there's no need to buy a new PSU for it, so it could simply happen as natural evolution without causing anyone too much trouble, aside from some with transparent cases and very careful aesthetics. They wouldn't like an adapter or a random cable if they currently use some beautiful third party cables.
https://forums.guru3d.com/data/avatars/m/196/196426.jpg
Every PC connector class got smaller and smaller as time progressed. Remember Molex power for HDDs ? It became smaller with SATA, and even smaller with NVMe (power and signal merged into one tiny package) How about USB? Type C now transfers a lot more power than USB(1,2) ever did. Main buses... ISA was HUGE and used gigantic contacts. PCI got smaller then PCIe has much thinner contacts and can transfer more power This is because engineers figured out how to make better contact with smaller surface, and how do distribute load over multiple contacts. I welcome this change, it was about time to get rid of those chunky and ugly PCIe power connectors ! Can't wait for the motherboard transition to pure ATX12v and get rid of that huge ATX 2.x connector
data/avatar/default/avatar17.webp
Goddamm, look at those thicc cables, so sexy!
data/avatar/default/avatar36.webp
i have to swap out my cables for another due to them getting flexible when in use. these cables look very thin and will suffer from heat causing the cable coating to become flexible. we put to much amps down these we could be looking at a fire hazard.
https://forums.guru3d.com/data/avatars/m/245/245554.jpg
Kaarme:

I'd welcome it as long as it's free of license costs for everybody.
I think the 'license cost' will be whatever Molex has for the current 6+2, after all it's a new Molex standard, not Nvidia proprietary. You can see more here if you haven't already: https://www.molex.com/molex/products/part-detail/crimp_housings/0430251200 https://www.molex.com/molex/products/family/microfit_30
wavetrex:

I welcome this change, it was about time to get rid of those chunky and ugly PCIe power connectors ! Can't wait for the motherboard transition to pure ATX12v and get rid of that huge ATX 2.x connector
Amen. Laptops have already been doing this for a long time, converting to smaller voltages in the mobo rather than bulk up the power supply cable even more.
data/avatar/default/avatar14.webp
How much power can it deliver? More than 150W?
https://forums.guru3d.com/data/avatars/m/204/204717.jpg
Martin5000:

i have to swap out my cables for another due to them getting flexible when in use. these cables look very thin and will suffer from heat causing the cable coating to become flexible. we put to much amps down these we could be looking at a fire hazard.
Looks like the wires are the same gauge to me. Based on this -> https://www.engineeringtoolbox.com/amps-wire-gauge-d_730.html even if they were 25 gauge wires which are incredibly thin, it could handle 576 watts. (6 circuits * 8 max amps from table * 12v).
https://forums.guru3d.com/data/avatars/m/256/256969.jpg
Damn, it's the same size at the 8 pins, looks like the way forward.
https://forums.guru3d.com/data/avatars/m/270/270041.jpg
P.O.N.:

How much power can it deliver? More than 150W?
Someone tell me if I am wrong but the new connector looks to be able to provide 300w of power
https://forums.guru3d.com/data/avatars/m/282/282600.jpg
It remains to be seen if this is the new standard though, if down the road that 6 or 8 pin variants on this scale rather than the old clumsy method which I doubt anyone actually liked. Its about time some other connections were shrunk too
https://forums.guru3d.com/data/avatars/m/80/80129.jpg
Cplifj:

Less surface area that has to do the same high power, how long will it take for the first one to MELT ?
Never
https://forums.guru3d.com/data/avatars/m/243/243702.jpg
I wonder how hard it is to pull it out.
https://forums.guru3d.com/data/avatars/m/79/79740.jpg
I hope PSU manufacturers can offer an optional 12-pin cable that plugs directly into their PSUs (like the seasonic). Would prefer that than use adapter.
https://forums.guru3d.com/data/avatars/m/273/273678.jpg
Ricepudding:

Someone tell me if I am wrong but the new connector looks to be able to provide 300w of power
600
alanm:

I hope PSU manufacturers can offer an optional 12-pin cable that plugs directly into their PSUs (like the seasonic). Would prefer that than use adapter.
Be Quiet has said they will.
https://forums.guru3d.com/data/avatars/m/174/174772.jpg
alanm:

I hope PSU manufacturers can offer an optional 12-pin cable that plugs directly into their PSUs (like the seasonic). Would prefer that than use adapter.
We will most probably also be able to get the connectors to assemble our own besides being able to get aftermarket cables with the 12 pin for modular PSU's.
https://forums.guru3d.com/data/avatars/m/232/232349.jpg
Bad ass! Was hoping it wasn't some "monolithic" connection "to rule them all" kind of thing. Very excited. Have three 1.5k PSU's on stand by for that necessary "POWAH" requirements. And I love that video from Nvidia explaining how things needed to change in order to accomplish something revolutionary once again. All of this "history of the GPU" shtuff Nvidia is and has been interesting too. A step back in the past for sure seeing all of it once again.
https://forums.guru3d.com/data/avatars/m/232/232349.jpg
It's going to be an additional cable that connects to two eight pin cables people. It's been stated before. Only thing costing money is going to be the purchase of the connector in order to get the twelve pin. Have to buy it unless it's packed in with your if brand new PSU.
https://forums.guru3d.com/data/avatars/m/72/72485.jpg
This will definitely become the standard eventually. It's just like back when we had to use 4 pin molex connectors to 6 pin PCI E adapters. It was a pain, but look where we're at now.
https://forums.guru3d.com/data/avatars/m/79/79740.jpg
Cplifj:

sure, that is the reason they used 2x8pins in the past. Nvidia just throwing out safety guidelines to save a buck. But yeah, fanboys..... are not electrical engineers.
Cringe comment 🙄. Pretty sure Nvidia knows what they are doing in terms of "safety guidelines" than some random forum poster as yourself. Also "fanboys" is a dumb term to use in the context of your comment. It says more about you than the ppl you are addressing.