Download: NVIDIA GeForce 516.94 Game Ready Drivers

Published by

Click here to post a comment for Download: NVIDIA GeForce 516.94 Game Ready Drivers on our message forum
#6040729
data/avatar/default/avatar07.webp
With the GPU connected to an HDMI 2.1 audio/video receiver, audio may drop out when playing back Dolby Atmos. [3345965] Fixed?!! Whoa!
#6040733
https://forums.guru3d.com/data/avatars/m/109/109213.jpg
These made the light in my oven flicker, rolling back to 512.95.
#6040735
https://forums.guru3d.com/data/avatars/m/262/262241.jpg
OnnA:

Great driver so far, installed over previous (+ reset settings in NVCP, set again + Inspector Tweaks). All fine. Tested: BF2042, FH5, Last Epoch, MtG A & Solasta.
What about this? "Open Issues - [Forza Horizon 5] Rainbow like artifacts in game after driver update." Or is it a temporary thing until reboot?
#6040743
https://forums.guru3d.com/data/avatars/m/260/260114.jpg
FranciscoCL:

What about this? "Open Issues - [Forza Horizon 5] Rainbow like artifacts in game after driver update." Or is it a temporary thing until reboot?
Played FH5 today and everything is fine.
#6040749
data/avatar/default/avatar10.webp
yeah undervolting is the way to go. 856mv at 1860mhz on a 3070, 125w on forza 5 instead of 215-225. next gen doesn't scare me so much thanks to it. at worst with an undervolt it will be like my stock TDP we all know that both AMD and Nvidia overvolt their cards for "stability" (actually probably planned obsolescence and deals with PSU vendors) we all remember the HD 7000, R9 Fury, Vega series and their notoriously bad overvolting.. it's been like this for a while
#6040751
https://forums.guru3d.com/data/avatars/m/286/286082.jpg
Andrea_23:

With the GPU connected to an HDMI 2.1 audio/video receiver, audio may drop out when playing back Dolby Atmos. [3345965] Fixed?!! Whoa!
Fixed? Subjective. Is the HDMI 2.1 dropout issue corrected? Nope.
#6040764
https://forums.guru3d.com/data/avatars/m/225/225084.jpg
I don't bother with undervolting my 3090 as just running the card in Balanced mode means it uses way less watts. When i watch the cards behaviour in this mode with GPU-Z it runs between 1200 - 1755mhz in games and is up and down as it needs fps. Compared to running the card in Max performance mode where it runs at solid 1755mhz, well as you can imagine this effects both wattage and temps. Looks like about 100watts less AVG and 6C cooler for only a small drop in frames.
#6040773
https://forums.guru3d.com/data/avatars/m/278/278667.jpg
valorex:

- [DirectX 12] Shadowplay recordings may appear over exposed when Use HDR is enabled from the Windows display settings.
So a work around I figured out for this, and it works for my brother as well - is to change the output dynamic range to limited then back to full in NVCP - then the HDR is captured correctly with Shadowplay.
#6040783
data/avatar/default/avatar28.webp
i came here just to say that, this driver is super smooth on my rtx 2060 aoc 24g2 g sync enabled and its doing its thing. not sure what was wrong old drivers. this driver version is a keeper 🙂
#6040784
https://forums.guru3d.com/data/avatars/m/236/236791.jpg
timespy graphic score droped for about 300 points with this driver compared with 512.95
#6040787
https://forums.guru3d.com/data/avatars/m/269/269781.jpg
Performance down , this driver is made for fucking cartoon graphic games shit
#6040788
https://forums.guru3d.com/data/avatars/m/166/166060.jpg
loracle:

Performance down , this driver is made for procreating cartoon graphic games crap
So it's a keeper for you, then?
#6040793
https://forums.guru3d.com/data/avatars/m/109/109213.jpg
Nah, he's probably rolling back to 512.95 also.
#6040797
https://forums.guru3d.com/data/avatars/m/57/57985.jpg
I am happy with these, no problems, running nice and smooth in Vanguard
#6040801
https://forums.guru3d.com/data/avatars/m/282/282029.jpg
Flakman:

Driver benchmarks faster than previous 516.xx drivers and no issues so far. Keepers for me.
Benchmark the same as the 516.79 this driver is an updated 516.79 with the same audio drivers ,no issues here keepers ,Sure....
#6040802
https://forums.guru3d.com/data/avatars/m/280/280625.jpg
BenchAndGames:

timespy graphic score droped for about 300 points with this driver compared with 512.95
Affirmative. Not a big deal, but I see the same drop.
#6040805
https://forums.guru3d.com/data/avatars/m/88/88351.jpg
scaramonga:

These made the light in my oven flicker, rolling back to 512.95.
Ovens require the heat of AMD products, should switch.
#6040814
https://forums.guru3d.com/data/avatars/m/236/236802.jpg
intellimoo:

Ovens require the heat of AMD products, should switch.
You probably mean the heat of RTX 3090 Ti with power up to 480W 😀
#6040841
https://forums.guru3d.com/data/avatars/m/217/217682.jpg
Why so many sticky drivers?
#6040842
https://forums.guru3d.com/data/avatars/m/238/238369.jpg
Memorian:

Why so many sticky drivers?
True, we need only the latest.

Previous Page

Next Page