Download AMD Catalyst 14.6 RC2 Driver

Published by

Click here to post a comment for Download AMD Catalyst 14.6 RC2 Driver on our message forum
#4855078
data/avatar/default/avatar23.webp
Thanks for the feedback guys...looks like yet another lame 14.x set think i'll be sticking with 13.12 till Nv release there 8x0 cards and i can move back to the green team
#4855083
https://forums.guru3d.com/data/avatars/m/224/224067.jpg
The 14.6 Beta 1s have been fine for me, got a couple of frames increase, and had no issues. 🙂 Just re-ran Sniper V2 again back on the Beta 1s, minimums gone back up to normal, 40 odd. Thought they were a bit low on the minimums, as i also noticed while running the LL bench, on some parts i was dropping as low as 45/50, where as on the Beta 1s, was only going around 70/72, same parts.
It's the Eyefinity changes that broke everything for me, I run Eyefinity 24/7 now and it's unusable with 14.6, they broke everything about it, mainly Win key & P to swap between single and multi screen doesn't work any more Along with a list as long as my arm of other problems, and 0 performance improvements for WDs, actually -20% in watchdogs, I get way better fps with 14.4 I hated my machine while I was using 14.6, it's great again with 14.4
#4855088
data/avatar/default/avatar20.webp
Knock on wood ... but these do seem to have fixed the black screen video options dialog.
#4855089
https://forums.guru3d.com/data/avatars/m/55/55855.jpg
Ahh, i don't run Eyefinity. :P Minimums are dire on these though for some reason, so will wait for the 14.7s, or whatever ones are next, as these are RCs, the only update they'll get is a certificate to go WHQL. 😀
#4855097
https://forums.guru3d.com/data/avatars/m/224/224067.jpg
I had Eyefinity setup for about a week, and it worked fine on 14.6; even GW2 still had proper Eyefinity detection. Was able to switch back and forth without any real issue either (just went to CCC to re-enable and disable Eyefinity manually; no Presets)
Yea switching between from CCC works, but profiles only work about once, then you have to do it manually again each time, set up bezel correction each time and it's a PITA compared to hitting Win&P a couple times Works fine with 14.4 Anyway there was no benefits with 14.6 over 14.4, and many negatives, so no reason to keep them for me
#4855108
data/avatar/default/avatar23.webp
Have they fixed the damn monitor disconnect bug thats been tooling around since 14.1?
#4855117
https://forums.guru3d.com/data/avatars/m/224/224067.jpg
Have they fixed the damn monitor disconnect bug thats been tooling around since 14.1?
Never had that bug
#4855130
data/avatar/default/avatar03.webp
lots of others have
#4855162
data/avatar/default/avatar28.webp
Is this just the same as the APU driver but WHQL version?
#4855169
data/avatar/default/avatar08.webp
i think the APU version was june 2
#4855267
https://forums.guru3d.com/data/avatars/m/245/245519.jpg
this drivers are good for hd 7970 dual-x ? please answer to me
#4855323
data/avatar/default/avatar10.webp
lots of others have
But can you explain what do this bug ? the monitor disconnect ? I ask, because with some Displayport monitors, if i power off the monitor, the gpu send me back a message that the monitor have been disconnected ( check the cable etc ), but not with HDMI.. but it is seems more linked to DP than anything.
#4855399
https://forums.guru3d.com/data/avatars/m/53/53444.jpg
New driver to test. Nice. 🙂 Still errors though in State of Decay, Spintires and others. Will go back to 14.4 later, but wil test them first anyway.
#4855521
data/avatar/default/avatar15.webp
I do not see updates for R9 290 ;/
#4855701
https://forums.guru3d.com/data/avatars/m/245/245519.jpg
Hi, Yes, this drivers are good for HD 7970 😉
tank u so much
#4855779
data/avatar/default/avatar33.webp
But can you explain what do this bug ? the monitor disconnect ? I ask, because with some Displayport monitors, if i power off the monitor, the gpu send me back a message that the monitor have been disconnected ( check the cable etc ), but not with HDMI.. but it is seems more linked to DP than anything.
if the monitor goes into powersave, or you turn it off, it uninstalls itself. when you turn in on, or comes back from power save, it reinstalls. like what happens when you unplug/plug a USB device. it disabled the virtual desktop, and screws with eyefinity. happens on DP and HDMI, not sure about DVI.
#4855784
data/avatar/default/avatar38.webp
Last driver update before I upgrade my card. works fine
#4855841
data/avatar/default/avatar14.webp
Not a good start, opened AB, selected profile, BSOD restart, after the restart, profile selected, fine :P
i got that very same BSOD LOL
#4855863
data/avatar/default/avatar19.webp
Has anyone managed to make these install on laptops that use switchable graphics? I play Wildstar and I've been waiting for these improvements for a while... Cheers.
#4855888
data/avatar/default/avatar39.webp
Still no cf profile for wildstar.....

Previous Page

Next Page