ASRock Micro-ATX Motherboard with AMD A620 Chipset Revealed in Leaked Photos

Published by

Click here to post a comment for ASRock Micro-ATX Motherboard with AMD A620 Chipset Revealed in Leaked Photos on our message forum
https://forums.guru3d.com/data/avatars/m/246/246171.jpg
A620 appeals to me - I don't care about PCIe 5.0 or beefy VRMs, since I want my next system to prioritize efficiency (so I'll probably be undervolting) and I don't care about achieving hundreds of FPS. Now all they have to do is release an ITX version.
https://forums.guru3d.com/data/avatars/m/268/268248.jpg
schmidtbag:

A620 appeals to me - I don't care about PCIe 5.0 or beefy VRMs, since I want my next system to prioritize efficiency (so I'll probably be undervolting) and I don't care about achieving hundreds of FPS. Now all they have to do is release an ITX version.
This motherboard above has 4(CPU)+1(ram)+1(igp) with just 4 stages 65watt would be fine 95 watts will be the absolute max with out good airflow or direct air hitting it most likely will throttle the CPU anything over that will be out of the question
https://forums.guru3d.com/data/avatars/m/246/246171.jpg
Venix:

This motherboard above has 4(CPU)+1(ram)+1(igp) with just 4 stages 65watt would be fine 95 watts will be the absolute max with out good airflow or direct air hitting it most likely will throttle the CPU anything over that will be out of the question
I'm keeping my eye on a 7700 (a 65W part) and then undervolting it. I don't intend to use the iGPU, and I'd probably go with 6000MHz for RAM. So, I should be well below the thermal limits. In any case, I'd probably glue some small heatsinks to the VRMs just in case. I'm committed to upgrading my GPU first though. CPU performance really doesn't matter that much in 60FPS gaming and it's ridiculous if I upgrade my CPU for a 3rd time before swapping out my nearly decade-old GPU.
https://forums.guru3d.com/data/avatars/m/268/268248.jpg
schmidtbag:

I'm keeping my eye on a 7700 (a 65W part) and then undervolting it. I don't intend to use the iGPU, and I'd probably go with 6000MHz for RAM. So, I should be well below the thermal limits. In any case, I'd probably glue some small heatsinks to the VRMs just in case. I'm committed to upgrading my GPU first though. CPU performance really doesn't matter that much in 60FPS gaming and it's ridiculous if I upgrade my CPU for a 3rd time before swapping out my nearly decade-old GPU.
Without some psycho pbo setting the 65 watts 7700 should be fine , my msi's pbo was pushing my 5800x to 180 watts and 1.375 v ..... Now it happily runs on 1.18v (I got a supper good piece !) But I bet a lot of those chips will run 1.25-1.26 just fine !