Acer Announces 35in Predator Z35 with G-sync and 200Hz

Published by

Click here to post a comment for Acer Announces 35in Predator Z35 with G-sync and 200Hz on our message forum
#5153369
https://forums.guru3d.com/data/avatars/m/259/259676.jpg
Height is like having a 28" monitor ( plus the ultra wide ) so imagine that you have to sit about ~80 cm far from monitor so you don't actually see its density and stay at sharp level. I was between 24" vs 27" 1080p (wide,you know,regualr ones..),when I saw the 27@1080p I didn't like that I would have to sit further that I used to. Same will be for this resolution on this monitor.
#5153382
https://forums.guru3d.com/data/avatars/m/123/123760.jpg
That's what they said about 60hz and 100hz. How do you know what 200hz is like? Have you tried it?
Diminishing returns comes to mind at this point. Going from 60 to 120 or 144 = Epic, going from 120/144 to 200 ... I doubt it. Much more interested in flatscreen technology that would have a more direct effect on the reduction of latency (as in "near CRT" like BTB and GTG). OLED maybe?
#5153463
https://forums.guru3d.com/data/avatars/m/260/260103.jpg
Oh Hell yeah. I do want this.
#5153467
https://forums.guru3d.com/data/avatars/m/232/232130.jpg
Need 322Hz to run dota2.
#5153491
https://forums.guru3d.com/data/avatars/m/259/259676.jpg
Weird...many posts here comes with sarcasm or is it stupidity..?
#5153609
https://forums.guru3d.com/data/avatars/m/115/115462.jpg
Oh damn, and I'm still running ancient 60Hz lol. Although I'm still to find a 1440p+, IPS, 16:9, 30"+, 144Hz, g-sync monitor. 🙂
#5153695
https://forums.guru3d.com/data/avatars/m/142/142454.jpg
Diminishing returns comes to mind at this point. Going from 60 to 120 or 144 = Epic, going from 120/144 to 200 ... I doubt it. Much more interested in flatscreen technology that would have a more direct effect on the reduction of latency (as in "near CRT" like BTB and GTG). OLED maybe?
"100 Hz is nowhere near enough. 200 Hz would be a significant improvement but still not enough; the sweet spot for 1080p at 90 degrees FOV is probably somewhere between 300 and 1000 Hz" Michael Abrash (Oculus cheif scientist) http://blogs.valvesoftware.com/abrash/down-the-vr-rabbit-hole-fixing-judder/ Hopefully as new monitors come along in the next few years we will find out where the point of diminishing returns is! I also want lower input latency too, I want everything 🙂
#5153753
https://forums.guru3d.com/data/avatars/m/123/123760.jpg
Perhaps sidetracking a bit, but are you guys aware that increased polling rate on the mouse indirectly influences camera movement and screen tearing, etc? A guy at a mice forum took some high fps camera footage at 125, 500 and 1000 Hz and compared frame updates, the change in motion on the screen was noticeably smoother on 1000 Hz. Also wouldn't surprise me that different rules apply for virtual reality/3D.
#5153769
data/avatar/default/avatar23.webp
Oh damn, and I'm still running ancient 60Hz lol. Although I'm still to find a 1440p+, IPS, 16:9, 30"+, 144Hz, g-sync monitor. 🙂
LOL 144Hz + 30''+ ALONE are hard find
#5153787
https://forums.guru3d.com/data/avatars/m/264/264442.jpg
200hz? only in cs go and minecraft...
#5153841
https://forums.guru3d.com/data/avatars/m/115/115462.jpg
LOL 144Hz + 30''+ ALONE are hard find
I know lol, guess I'll stick with my ancient Dell U2711 some more. :P
#5154117
https://forums.guru3d.com/data/avatars/m/254/254969.jpg
Perhaps sidetracking a bit, but are you guys aware that increased polling rate on the mouse indirectly influences camera movement and screen tearing, etc? A guy at a mice forum took some high fps camera footage at 125, 500 and 1000 Hz and compared frame updates, the change in motion on the screen was noticeably smoother on 1000 Hz. Also wouldn't surprise me that different rules apply for virtual reality/3D.
Very old news really that 1000hz mouse makes stuff smoother :infinity:
#5154143
data/avatar/default/avatar02.webp
mehh , not impressed... I'm set for the next 10 years with philips bdm4065uc, a 40" 4k VA, sli Vsynced @60hz, smooth as silk and no lags or motion blur, plus it cost me half those screens for some reason ,so didnt have to sell an arm and a leg. If black levels and color reproduction is important, worth checking it out more importantly, check if your display can do chroma 4:4:4 @4k 60hz, over display port 1.2, http://www.geeks3d.com/20141203/how-to-quickly-check-the-chroma-subsampling-used-with-your-4k-uhd-tv/ this panel passes this test fine
#5154260
https://forums.guru3d.com/data/avatars/m/123/123760.jpg
Very old news really that 1000hz mouse makes stuff smoother :infinity:
Yes, but alot of people underestimate how much 1 device it's latency can influence the other.
#5154354
https://forums.guru3d.com/data/avatars/m/254/254719.jpg
60 to 144Hz is awesome, so 144hz to 200hz I think it will be insane
#5158464
https://forums.guru3d.com/data/avatars/m/142/142454.jpg
Height is like having a 28" monitor ( plus the ultra wide ) so imagine that you have to sit about ~80 cm far from monitor so you don't actually see its density and stay at sharp level. I was between 24" vs 27" 1080p (wide,you know,regualr ones..),when I saw the 27@1080p I didn't like that I would have to sit further that I used to. Same will be for this resolution on this monitor.
Yes, the pixel density of this monitor is only fractionally less than a 27" 1080p 24" 1080p PPI - 91 27" 1080p PPI - 81 35" 2560x1080 PPI - 79
#5167308
https://forums.guru3d.com/data/avatars/m/264/264755.jpg
thats one sweet looking screen, would not mind 3 of those

Previous Page

Next Page