Dell "S3222HG" 31.5-inch gaming LCD with curved VA panel, and a resolution of 1920 x 1080.
They should really stop releasing monitors with such low pixel-to-screen ratio. The 31.5-inch full HD gaming liquid crystal display that makes use of a VA panel with a curvature of 1800R and thus has a resolution of 1920x1080.
AMD FreeSync Premium is supported in addition to the high-speed drawing, which is achieved by a refresh rate of 165Hz and a response time of 1ms (MPRT) / 4ms (GtoG). It also has gaming features such as timers, frame rate counters, and dark stabilizers, as well as "flicker-free" technology, which suppresses screen flicker, "ComfortView," which minimizes blue light radiation, and user-defined profiles, which may be customized to meet specific requirements.
Brightness 350 cd/m2, contrast ratio 3,000:1, maximum display color 16.7 million colors, viewing angle horizontal / vertical 178 degrees, color gamut sRGB 99 percent, interface HDMI x2, DisplayPort 1.2 x 1, audio output x 1 are the major specs. It features a pitch of 100x100mm, and the stand allows for tilt adjustments ranging from -5 to 21 degrees and height adjustments ranging from 100mm to 450mm. The external measurements are 708.76 mm in width, 237.61 mm in depth, and 455.98 mm in height, with a weight of 6.85 kg (excluding the stand).
Senior Member
Posts: 7859
Joined: 2010-08-28
We need 32 Inch 4K OLED TVs, should be fine playing at 1080p then.
Heck you can even make a custom ultra wide resolution with black bars then due to OLED not letting light through the black.
Senior Member
Posts: 949
Joined: 2010-01-04
I hope it only costs €50 because that's all a 1080P VA monitor should cost in 2021
Senior Member
Posts: 5289
Joined: 2006-12-22
More like 400e. 1080p 31' is pixelosis for me.
Max for 1080p is 24', don't you try to prove me wrong. I seen it.
Senior Member
Posts: 18502
Joined: 2008-08-28
Even on 27" you can see the individual pixels only if you look closely but 32" 1080p would be just awful.
Senior Member
Posts: 5289
Joined: 2006-12-22
1080p at 31' is no go . Sorry.